Recent content by daedong

Another thumbs up for the Drill Dr, I bought mine 10 years ago out if the USA and run it of a step dowd transformer, 240v to 110v. It's the best thing since sliced bread, and I can sharpen a drill by hand pretty well, but cannot beat the Drill DR!

I have used new annealed copper and also tried aluminium crush washers. I have not tried loctite yet as I fear if that does not work or I ever have to remove it again I will shear the banjo bolt. This morning I have cleaned up the thread and removed all possible oil from both threads and...

Hi, long time since I have been here but I am in need of help. An old well used DK50 has decided to not cooperate! On the near side there is an oil feed pipe that runs up to the turbo. I sheared the Banjo bolt trying to nip it up because it was leaking. I got the sheared piece out and turned up...

California, sorry for the late reply ;) , I dropped in today for the first time since Christmas 2014. I sure did get that differential back working in early 2015 and it is still going strong. when all the parts finally arrived they where slightly different from the originals but with a few extra...

Hi folks. long time no post! Recently I have had some troubles starting my old DK50. At first every time i went to start the tractor it was as if the battery had no life and the dash lights would go out when engaging the key. I suspected the switch was faulty so I replaced it, all went well for...

Think I have had her 13 years, treated her like crap, and she has finally got her back up! pictures tell all the story

Hi folks Surfing the net today and just thought I would drop in! My, this place has grown stacks from the early days, it's a bit nostalgic coming back for a look. Congratulations Muhammad, you have done a marvelous job. Vin

I am looking for a US dealer that could supply glow plugs for a DK 50 2001 model anyone got any suggestions? Locally here in OZ they retail for around $80, that seems to be a little over the top.

just thought I would share this, I spotted it in Holmes county Ohio.

TBN has been a great online meeting place over many years now. Thanks for this must go to the team here for this. Unfortunately many members no longer post here anymore so I was wondering if it would be possible to have an online reunion day or week. It would be great to say G’day to all the...

The gears are locked and i need to remove the top cover of the box. Has anyone ever done this and could they tell me what to do. Or maybe someone has a manual and could look it up for me. Thank you in advance.

I need more traction travelling over sand with my DK50. My problem is this though I also do about 50% of the tractor work on bitumen (tar, black, whatever you call it in the north). The list of tire options goes on and on eg. type of tread, loaded or not loaded yet there appears to be no really...

On the weekend I was travelling through an area that I left some 5 years ago. On the way through I decided I should stop and say g’day to an old friend that owns a service station. After chatting a while he told me he had just got out of hospital and that he had been in there for about 5 weeks...

I hope this doesn't get deleted These folks just don't understand the issue, if they ever seen a flyblown sheep suffering or dying for that matter their views would be different I am sure. I have seen hundreds of blown sheep over the years and I can tell you it ant’s pretty. Mulesing reduces...

Don\'t know what to say You will need powerpoint