Dinico's latest activity

Excellent idea, will do that. I had decided to change out the fluid. Removed cap, and removed hydraulic filter first. Should more than...

The PTO engagement valve is lever operated. Seems to be a rotary valve. I'm looking at it now. I fully engaged the lever, then...

Odd question. If I take the oil filter off first with the fill cap off, shouldn't more than a quart of fluid drain?

Your correct. No backhoe on the 2600

Thanks for clarifying how the gears work and for the questions and suggestions. Ran the tractor for about 2-3hours. Borrowed a friend's...

With FEL down bucket curled, 3 pt lowered, engine running, glass is middle. Turn engine off, oil drops to below glass. I released any...

It only foams when the PTOs are engaged. I'm not for sure how the PTO gears work inside the transmission. Are the PTO gears under...

Hooked tiller up. Raising it with lift and driving with the load caused to oil foam. Was clear. Engaging the PTO for 15 seconds, then...

Something doesnt seem right. It's never done this before. Tractor is at idle. It's setting level with FEL and 3pt down. Hydro level is...

Haven't thought of that. Your both right as it could isolate the issue. Haven't had the tiller on this year. Honestly the whining sound...

Yes, belly mower using mid mount PTO. 2 hose clamps on the suction line. I had to use a ratchet myself to tighten them up. Is it...

Good call on adding some die. Definitely going to get some. I did test with deck. Still foam. My most recent post explains the fluid...

Oil level went back to middle after starting it and curling the bucket. Both FEL and 3 pt were down. Oil was clear driving, using FEL...

OK. I drained the foamy oil. Emptied out filter. Put back in the oil that was previously in it. Let it warm up a but before cycling...

You are right about the chasing noises. Would be glad for just the whine and no foam at this point.