Recent content by DocD

  1. D

    54c with 345 - not mulching well

    I have a question to post to all of the "experts" here on the board. I have a 345 JD with a 54c deck and have recently purchased a mulching kit for it. I have experience with the 48 inch deck with basically the same kit (plastic baffles with new blades) and it has done a wonderful job with the...
  2. D

    3X20 Cab toolbox options

    Has anyone here solved the problem of placement of a toolbox on a 3X20 with a cab, loader, and mid-mount mower? On the new cab models there are now studs in the rear cab supports to mount equipment (bolt studs) - had anyone used this to mount a toolbox or have any other ideas where to put a...
  3. D

    Interesting Story - Still a problem

    I want to start my story by saying that I have had a great Dealer and John Deere warranty service, but still am having a dilemma. My story starts with buying a new cab 3720 - 2 1/2 years ago. From the start, the loader seemed to have some cavitation when lifting (been addressed here a few...
  4. D

    60" or 72" snowblower for 3720

    I recently purchased the 60" Buhler Snowblower for my 3720. Now am thinking about increasing to the 72". Anyone have any experience with the 72" on the 3720? Thanks, DW
  5. D

    Continued Vibration

    I am wondering about a rotary mower I just bought. When I hooked it up, I noticed a large amount of vibration. that read most of the threads and have lubed the blade pivot points and it definitely made a big difference. Still, there is a rhythmic vibration even at high speed. I have a 3720 cab...
  6. D

    Pole Shed Project - Input Always Welcome

    Recently I have started a project that I have been working and saving for a number of years. I must admit it is great to see this come together but it is getting rediculous how much steel and general building materials are costing these days. My new shed will be 40X90X16. My shop part will be...
  7. D

    Not offering Air Seat anymore

    Quick question for those of you more knowledgable JD operators - I am going to purchase a CUT in the future (not really needed until next spring) but I could purchase at any time. I have been holding off and I do see that the 0%financing will run out at the end of Oct. I also see that the air...
  8. D

    JD 3720 or Toolcat

    I am bringing my discussion here for information from those on "the other side of the fence". I really appreciate the knowledge that is aquired from these boards and the general TBN site. Here is my dilemma: I have purchased 9 acres of land that I will be building a house and shed in the next...
  9. D

    Toolcat or Utility Tractor

    I have been reading this forum for a few months now and have been really impressed with the information and knowledge that is shared here. I was introduced to the toolcat by a relative and have been very intrigued by its design and function. A month ago I purchased about 10 acres of land that...
Top