Recent content by DonLawson84

I hope you got it fixed by now, but sounds like the fuel shut off solenoid. If you are still having the issue, PM me and I will try and assist you over the phone if you have a meter

Another addition to help any troubleshooters that find this post later on. If your tractor will turn over and but will not stay running and you diagnose as the fuel shut off solenoid, that part from the dealer is around $200. Once cross referencing i found the same part for around $20 (Part #...

I could not tell if it was in my head or real. I have 370 hours on my MT125 and it seems really weak in HIGH gear, I noticed a while ago and just adjusted to it by running higher RPM and shifting to LOW on steeper grades and when have more weight in the loader. When I did the 250HR service I...

Up and to the left is definitely it, crazy I put all those hours on the machine and never had any reason for the float until recently for a large area of grading.

Thank you, I just came in from running little blue and will try next time I am running it. Have a good holiday weekend

I have had this tractor 3 years and 370 hours, I looked in the manual and don't see how to float the loader. I have tried pushing the joystick different ways to try and lock in a hidden position, nothing.

MT125 with about 300 hours. Tractor will start, then shut right off. Replaced HST relay and fuel shut of solenoid. Diode tested good. Anyone ever experience or hear of this happening or any thoughts? Thanks

TLB seems when i have a full load in the bucket and backing up, it is almost impossible in HIGH. When in LOW with a full load in the bucket, it is hesitant to back up with the wheels turned. Anyone have similar? It has always been that way, I checked the linkage and noticed nothing holding it up.

I hope this helps others out. No idea why wheels with tapered holes would have standard bolts with only lock washers. I found a Kubota part number that is conical wheel studs. I bought 20 from my local dealer for 36$, and they fit perfect with my LS MT125 rear wheels. Have not tried the front...

Has any one purchased or installed a 3rd function on their front bucket? If so, did they use a universal kit or LS specific?