Recent content by Draagyn

Looking at rebuilding my pickup a little on my John Deere 530 round Baler. I found a place (in Alberta I believe) that specializes in dismantling and used JD round Baler parts but have lost their contact information. Any direction greatly appreciated. Thanks.

Mower turns over by hand but slip clutch won't grab. Any temporary fixes until I can get it fixed properly?

The threads on my roll gap adjuster are stripped and unable to adjust. What's the best way to fix this? Left side is issue, right side shown in picture.

2010 F350 6.4 diesel, no lift no level, 35" 10 ply mudders, BW turnover ball, dpf delete with torque tech tuner, 34' tandem dually goosneck with 10,000lbs axles, 1975 black stripe IH 966, trailer guess weight 20,000lbs (skipped the scales)

Looking at hauling a round baler long distance on my gooseneck for the first time. Any tips on loading/unloading, tying down, blocking, height, width? At widest point it is 9" wider than trailer and allowable width without permit.

We have been storing up to 1200 bales a year in our gravel floor barn and have been fighting the moisture in our bottom two rows. I have built up the gravel to be about 6" above grade and have lined the whole floor with wooden pallets and still the bottom two bales pretty well go to waste. I get...

Looking for advice on what to feed our 3 month old jersey steer calf. He is weened off milk and has been on 18% medicated dairy calf starter for over a month. This feed says to only feed up to 3 months of age. The next step is a 16% medicated dairy calf developer, but I want to get away from...

I have a late 90s model PJ gooseneck trailer with tandem 7000 lb torsion axles. I believe these are dexter axles. One is bent and needs to be replaced. The most reputable axle company around has suggested to replace it with a flexi ride. Problem is they do not make one that matches my...

I need to upgrade my current New Holland 478 mower conditioner. There is case international 8340 for sale close by. Does anyone have reviews on this piece. Thanks!

My throttle linkage came apart in the field and I can't find the missing pieces or even know what they look like or where they go. It is working now but not correctly. I've searched JD parts schematics but can't find the right one. On the website I've found the linkages from console down to...

Does anyone have a skating rink on a man made pond? Year after year our pond freezes and then the ice breaks and water comes on top the ice and wrecks the rink. Why does this happen? How can I stop it? Thanks

I am looking for advice on whether to keep rebuilding my tractor or to buy something newer? I have 1965 JD 3020 gas synchro range rated 70hp pto. I am wanting to switch to round baling as our 30 acre field continues to yield more every year and is becoming too much work for the little amount...