EdGooding's latest activity
-
First vent I put in leaked, I epoxied the rest in place... no leaks. -
Almost makes me hope that they will get rid of DEF next!!!!
-
The fix: https://www.tractorsupply.com/tsc/product/ez-pour-hi-flo-replacement-spout-1053258
-
Almost looks like a dry stream bed. Unfortunately, the more you loosen and break up what's there, the more it's going to wash out. Can...
-
EdGooding reacted to EddieWalker's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
A Dealer told me that most people use too much grease, and they need to learn to only put in enough to do the job. I've gone back to... -
EdGooding reacted to dodge man's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
My best advice is just live with it and don’t wear nice cloths while on the tractor.
-
I have good luck with a locking lynch pin. but they are a little pricey.
-
I buy Lynch pins by the dozen at flea markets, the last I bought were $4/dozen. I buy a bag every time I attend a flea market if they...
-
`this is a compact/sub forum. my take is the forum demographic is elderly. lots of shot knees & other infirmities. hence HST seems to...
-
EdGooding reacted to John0829's post in the thread Ford Tractor Can’t Figure Out Timing with Good Post.
Sounds like you are missing the little metal clip that goes under the rotor. Aggravating little thing that usually ends up getting lost...
-
EdGooding replied to the thread Thinking about a 9n..Those side brackets are not intended to hold an implement at a certain height. They are called drawbar stays and are there to be used...
-
-
EdGooding replied to the thread Thinking about a 9n..Are you aware that the 9N does not have position control like your 8N?
-
EdGooding reacted to John0829's post in the thread how much gear oil for a woods RC-5 rotary cutter? with Good Post.
I prefer John Deere corn head grease or "0" grease for gear boxes. It is what I have/use in ALL my gear boxes.
-
It's too late now, but those seals will ALWAYS let lubrication oil into the bearing after a small amount of use. I make it a practice...
-
Hydraulic top link on your 3 pt. hitch sure makes it a lot easier and quicker. And not just for the bush hog. One of the best add-ons I...
