Recent content by Ernie-32

when you need a ladder to fill 'r up, where you used to simply stand on the front axle drive shaft...

It suddenly dawned on me that I could use the standard hydraulics! The double action plugs (top right) straight to the ram for horizontal movements, and the tilt ram only really needs pressure to rise, reversing down can be done by gravity! So I connected the bottom side of that ram to the...

Oh I see, float is more that 4th position that regular 3position handels/controls do not have. Thanks for explaining!

Nevermind I asked chatgpt and understand now that 'float' is a valve that lets the ram free when not operated (following the terrain for example for height control of mower) and 'blocked' is holding the ram in place when not operated (like with arm of a digger) Thanks, this is how I learn :)

that is the core of my problem with hydraulics, total newbee. Don't even know what a float is

Thanks LouNY, electric controls do not give that feedback that mechanical valves/handels give, but your link did make me find this which might as well replace the existing (leaky) control handle and add an extra handle at same time ! GREAT https://www.ebay.com/itm/395624385173

I've just bought a restored 845 from 1980 and attaching a mower like shown in the photo. The standard (two way action) hydraulic ram connections, are not enough to attach a side-ways moving mower that can also pivot vertically. I need to add a second pair of connections and a lever but have no...

okay, that's not so bad at all 137bar! Have a look at this link if anytime you need any conversion between all kinds of measures even money, volumes, distances etc : https://www.convertworld.com/en/pressure/pound-per-square-inch.html

Thanks for that info Lens12, would you happen to know the pressure available by the Iseki pump? So according to metric standards it would produce even 25L/min.

Thanks for your quick reply Topsize, if indeed you mean us-gallons that means only 11 L/min can't be enough to power a hydraulic rotor. But then again also imperial-gallons at 14/min would not be enough. Good to be warned for that, I'll have to look into the PTO version and won't bother to...

Anybody knows what, where, how to add the external hydraulic line connectors on an Iseki TX1510? Would it be powerfull enough to activate a hydraulic rotor of a small (80cm) mower blade? I'm considering to add to my tractor this feature below, which is a fence pole mower. But I wonder is my...

Hi there, just to warn and to inspire others; I had added twinwheels to the rear about 8 years ago to not get stuck in the mudd and prevent rolling over(rops). Now I live at another place in Southern France with hard clay grounds and short steep hills and pits. So last week one of my frontwheels...

Any news on this challenge ???

*** UPDATE *** After weeks monitoring oilpressure I was convinced it was always above 2 bar pressure, even on low revs and very very hot. I put back the original pressure switch and at first things looked okay, until I had some really challenging mowing to do and there the light came on again...

Yes this is indeed the place the manual indicates and I had looked already several times. Now I took another effort in discovering it and INDEED THERE IT IS !!! It is only visible when the light is at an angle and taking a photo of it, is nearly impossible :) Would have been nice if "1850" (it...