etpm's latest activity

  • E
    etpm posted the thread Drawbar pulling question in Safety.
    Reading in another thread about rollovers, and recalling how I almost rolled my 9N over backwards shortly after I bought it made me...
  • E
    etpm replied to the thread Float option routing.
    Out of the back of my valve the two spool covers are the same length. So I guess I have no float. It would be nice if I could just buy...
  • E
    etpm replied to the thread Generator/Electrical Question.
    Your first post said LOTO, not interlock. Big difference. Good idea to get the plug for outside and the proper cord end. Then you won't...
  • E
    etpm replied to the thread Generator/Electrical Question.
    True story: My neighbor wired his generator exactly as you propose. I advised him against it. Well, we were having a windy day and...
  • E
    etpm replied to the thread Beet Juice Tire Ballast.
    II looked at R I looked at RimGuard but there is certainly nobody close to me to install it and I don't know the price. Bio Ballast...
  • E
    etpm replied to the thread Float option routing.
    Thanks for the reply. My valve looks just like the on pictured on the 285. My 285 is reddish orange colored but is otherwise identical...
  • E
    etpm replied to the thread Joystick issues MF 1734 series.
    Greetings Buckchaser, If you want I could probably repair that part. For free. If you have the time for mailing stuff. What I would...
  • E
    etpm replied to the thread Float option routing.
    I have a Bulldog 285 FEL on my YM2310. It has no float function so I'm considering buying a valve that does. In order to choose the...
  • E
    etpm replied to the thread Oil & Fuel Fuel cans.
    Will it pump gasoline? My backhoe gas tank is very high so I hafta climb onto the machine with the gas can and then tip the can to fill...
  • E
    I don't like practical jokes, they usually just try for humor at someone else's expense. But I did get payback one time and it was a joy...
  • E
    Oh yes, Little Willie. Little Willie Pair of skates Hole in ice Golden Gates Willie with a thirst for gore Nailed his sister to the...
  • E
    etpm replied to the thread Looking for a good compact tractor.
    I'm using steel because I can get scrap plate for 40 cents per pound and I have the equipment and skill to make discs from rectangular...
  • E
    etpm replied to the thread Septic issue.
    That's weird. The system is connected to a plumbed house? Are there vents with open tops coming out of the roof? Rain could get into the...
  • E
    etpm replied to the thread Septic issue.
    When I put my septic in it had to be located a certain distance from the well, driveway, and property lines. Since all that stuff was...
  • E
    etpm replied to the thread Be careful of sinkholes.
    I somehow missed that. Thanks. That guy coulda been easily killed. Eric
 
Top