Recent content by Fi-Q

  1. F

    Your last generator Maintenance Run

    For « load bank » before buying one it might be worth to check with sone local major genset dealer « IE a Caterpillar dealer with an Energy division » and see with them what they charge you to load bank you genset.
  2. F

    Your last generator Maintenance Run

    No problems. On the other hand, back in the mid 2000’s I worked crazy overtime getting a USA manufactured windmill farm ( installed in Canada) to get it CSA compliant ( the equivalent of UL standard in the USA). At the start of this project, back then I was installation manager, I raised many...
  3. F

    Your last generator Maintenance Run

    In Canada, Eastern Quebec, but we use 60hz. As far as I know, the « costumer end » power is standard in North America, 120 / 240v at 60hz. Not sure where you took the 50hz for Canada ? I think diffrent region have diffrent high volatge for power lines ( I know Hydro Quebec use 735kv). And...
  4. F

    Your last generator Maintenance Run

    Bought a used PTO genset 3 years ago, tested when I bought it, but never used it after that. One of my friend is building a new house, and Hydro power keep beign delayed. His plaster guy will be there on Monday, so he asked me if he could borrow my pto genset so he can heat and power the house...
  5. F

    Your last generator Maintenance Run

    Well, yesterday, power went out. It was a plan outage ( snow plow it a pole earlt this week and it needed to be replace). But I needed some power to ger the old massey 165 going for snow clearing. Last time my eu2000i ran was december. I could not get it to start. Drop the gasoline, put...
  6. F

    Your last generator Maintenance Run

    Ahhhh !! Generators, it seems we never have enough.... so I have a champion 3000/4000 bought 10 years ago, been reliable, but it was too loud when going camping..... Few years ago I got a deal on a yamaha powered off brand 3000w generator, bought it to be the backup of the champion, barely...
  7. F

    Tu fully duct or not ?

    Hi, I am about to get some time off, so I will try to get as many thing finished in my ''never ending'' building my house project. I am going with hydronic radiant, in the basement slab (Already poured) , I will go with a suspended slab on main floor (Not poured yet) and stapple under for the...
  8. F

    Rotary Cutter  Bx2350 with woods hc 54

    I did post this already but I think I should have post it here instead of owninf/operating. Hi all, The tractor is not mine, it's my dad. But I am alowed to use as long as I pay fuel and help him with maintenance fees . So we are looking for a rotary cutter. Our kubota dealer wants to sell...
  9. F

    BX 2350 with woods HC 54 rotary cutter ?

    Hi all, The tractor is not mine, it's my dad. But I am alowed to use as long as I pay fuel and help him with maintenance fees . So we are looking for a rotary cutter. Our kubota dealer wants to sell us a 48 in Titan. And he also have a 48 in thrifty from last year he said he could make a...
  10. F

    Gathering a lot of fire wood for really really cold winter

    It's late Fall, and the Indians on a remote reservation in South Dakota asked their new chief if the coming winter was going to be cold or mild. Since he was a chief in a modern society, he had never been taught the old secrets. When he looked at the sky, he couldn't tell what the winter was...
  11. F

    Getting you drinkin eater from maple sap??

    I just hear of them on a radio show.... Looks like they won a bunvh of prize with there water. I am not a fan , neither avertising bottle water, but I think reclaiming augar shack watse into a almost pure water is a good concept. Disclaimer: I am not related to this company at all but I touhth...
Top