Recent content by gp1200x

Milwaukee and Ryobi power tools...more than enough power for hand tools....my Milwaukee will break your wrist if you are not holding it properly. Batteries okay for small stuff....even long pole reach branch cutters. They will never replace larger gas engines for a long time...too heavy and...

Agree with above posts. I have pulled out four stumps with my Mahindra Max24...24B backhoe ..same as 1526B. Sometimes the stumps are taper and some have broad root systems. Last one I tried (pin oak) beat the hell out of me and my tractor. 3 foot trunk and I had a hole about 5 feet deep all...

I have 26 hours on my tractor (bought used with 2 hours on it) and decided to order filters since the 50 hour mark will hit soon once I start pulling more stumps. The filter prices are extremely high ...... I may go with OEM for the first change but was wondering if anyone has ever found...

My new Max 24 only came with one key...is it a standard key that can be bought at Tractor Supply or Walmart?

I bought a "new" 2016 Max 24 TLB (used 1.5 hours actually) from a dealer and there are no hydraulic end caps which seemed odd. Are all the hoses ISO 3/8? I need to buy caps and maybe hose covers before the ends get filthy. Like the tractor but these things should be included. I can color code...

I am looking at a used eMax22 and it appears to have the weld issue where the center rod connects to the bucket. I know some people received new buckets...this is a 2014 model and if I buy it can I get the loader bucket replaced for free or is the warranty on these tractors not...

Max22 3 point hitch question Do the small eMAX 22 and 25 tractors allow you to maintain downward force on the 3 point hitch? Example my old Chalmers 620 allowed me to move the hitch down and I could float it or hold it at a position applying pressure on the blade or rake behind it.. It could...

I am looking at a used EMax 22 (missed a nice Max 25 with loader for 9500 new!) and it has very low hours on it - high 20s. I believe it is a late 2014 model with the single piston for the front loader. Are there any known issues with this model and year? I thought there was a loader issue...

These are all basically the same size (length dimensions) with a front loaded. Has anyone placed one on a 10ft trailer (assume side and front rails and back swing gate) and managed to get it to fit without removing parts like the hitch arms? It would probably require angling the bucket but...

Need help..from knowledgeable Kubota engine rebuilders I have an Airman AX15-2U excavator with a Kubota D1105 engine. I need an engine gasket kit to put it back together after pulling the head - wanted to make sure everything looked good even thought cranking pressure reached 620lbs in each...

Anyone have one of these mini-excavators? I have an Airman AX15-2 and I am trying to determine if the mahine parts....like the pins are identical.. manuals /CD expensive to buy ...and may not be the right one! Thanks

Anyone have any manuals or parts book for this? If so I would like to obtain a copy. I will pay for all shipping to and from (I'll give a deposit too if you're worried) and create a PDF file of the manuals for myself and you in return. I can no longer buy the manual from the company. Thanks

I recently bought a small mini-excavator. Cheap and everything appears to work but I have too much slop in the 18" bucket...pins are worn and they were not greased properly. I'm in NY..anyone know of a good machine shop in the neighboring area or states that works on replacement pins and...

I've been looking at the models and like the turfs on the 2x20 (very flat and wide) but noticed that the 3030 has a completely different style with more of an oval shape (bowed out in the center of the tread). This is the only turf style I have seen on all the 3030s so far. Are the B7800s using...

I'm shopping around for quotes, local and distant, on a 2920 TLB and wondering what the best % discount or price I should be able to get close to for a TLB setup (maybe a 54" MMM too if the total package isn't bad.) Options like a tiller I can get locally from TSC, AG or Northern pretty cheap...