Recent content by Grouse09

Hey Foggy, I was wondering how the Tar River NT drill would work on “side-hilling”? Would the seed get pulled out correctly? Or does the land need to be flat? Tim Traverse City, Michigan

If your landrake has two or more holes for your top link, use the lowest hole to the ground. That angle will give you the best angle to glide over the ground. Don’t get me wrong, it will still dig in. You will have to get good on the up/down lever and be active on it. When your tractor goes...

Mine are loaded. If I sense I am bogging down with the heavy weight up front (60” snowblower or FEL), I switch to low range. I normally do FEL work in low gear anyway.

Yep, that step up from the 2650 to the 33series is big…especially for the emission processes and the extra tactics you have to go through.

Has a recent hydraulic fluid change just been conducted? Has it always done this? If I had to start trouble shooting this, I’d clean up a couple drain pans very clean, drain the fluid, change the filters. I’d look at that fluid very carefully (In a clear lemonade pitcher) before I put it back...

Great post. Will check mine tonight.

Here is my Big Tool Rack. I did the ole TSC 3-point frame and rigged it myself. I leave it on most of the time with blow downs, and rock removal in full swing this season. I only brush hog twice a year. I only landscape rake once per year. I only rototill once per year. So, even with the...

I do the easy stuff first. Change the fuel filter, blow out or spray out your air filters and radiator. Take it back out with mower on and see if you can replicate the power loss. Hopefully you can’t.

Now that is something I could use right there!

Agree with the two guys above me. If you spun it and the blades didn’t turn, you broke it loose and “ran it in”. As long as you got the nuts tight again, you are good to go.

We used their stump grinder yesterday. Worth the wait…and the payment.

I am betting the linkage under the treadle peddle is sticking. Lube that zerk, but really spray the linkage all the way to the spring and above. And work that peddle by hand while you are under there.

Sweet ride. I have a front deck Grasshopper and love it except for the gas consumption. Its replacement will be diesel.

I think you’d be happier mowing with the ZT. I have a 60” Front deck Grasshopper and I have trouble with hills too. I have figured out a pattern to come down the hill and go up the less-sloped areas. My yard is 2 acres with irrigation. If you could “try out” the belly mower before you...

I need a cone spreader and a roller crimper.