Harry in Ky's latest activity

That's a confusing question, and why would you be concerned about it? I would expect to see zero AT the tank, but depending on a number...

https://www.messicks.com/catalogs/woods/1020-loader I guess this might be one option.

Now isn't that amazing?

Keep at it, you'll get there. For openers, your static pressure should closer to 75 - 80 PSI on a hot day. Your pressures indicate an...

This time of year that's every day.

Having never seen the cylinder you're working on I have no idea how it's made or how that joint comes apart. I only know the cylinder...

The 2120 is a better tractor overall (opinion sneaking in here) even though it's fifteen to twenty years older. Much simpler design...

There has to be a seal on that end. On the Ford tractors that used steering cylinders similar to that the "stepped down area" as you put...

Nothing electrical unless it's a power shuttle. Your description of events kind of rules that out. There is one thing that comes to...

Lots of ideas out there, some I agree with, some I don't. Personally, I think you're spot on with your assessments. New is NOT always...

Suit yourself. You made the claim that there isn't enough travel to get the PTO clutch released and still have free play at the top of...

So it no doubt has at least one remote valve on the back, totally separate from the loader valve. If you plug your gauge (or A gauge)...

At this point no one knows WHAT'S possible because no one knows what you have. Is this a dedicated loader valve that has the problem...

I guess I'm just stupid, but I can't see where adjusting the rod is going to gain anything. If the pedal linkage design is wrong and the...

ANYTHING aftermarket is a crapshoot. I'm surprised that YOU'RE surprised it didn't fit. Try another supplier. Might get one from a...