Harry in Ky's latest activity

No, you wouldn't pull the motor out. The screen is a brass mesh, about the size of the hose I.D. and about six inches long. I don't...

It's not an air leak. Anything you hear in the filler opening is more likely high pressure oil leaking off somewhere it shouldn't be (as...

There is no fuel pump. Only the primer pump, which CAN be a problem sometimes. It's the first place fuel goes after leaving the tank. I...

If it fails to steer in only one direction, you probably need to revisit the adjustment with two set screws. If there is enough play in...

Are the discs actually oily when you take them out or do you merely suspect a problem in that area? If so, you probably need new discs...

The other wires. One is a ground wire (the relay coil needs a ground) and the other one (I assume) goes to an operator aggravation...

So what's the hold up?

The fact you replaced the control valve spool with an aftermarket part raises questions. Why did that need to happen? While...

You really need a more accurate description of the problem. People have different ideas of the term "won't turn over". So the warning...

I'm no authority on computer controlled tractors, but if it's a common sense fuel system, then what would a computer have done before...

I doubt it's the wheel coming loose on the shaft. More likely the shaft is slipping up the column and coming free of the steering valve...

If you decide to try what I did, be aware there is a screen in the tank below the filler hose. I had to remove the hose from tank to get...

In fact, I put a pump on the Kubota engine I just installed on another machine. I never cared for Bobcat's idea of the primer bulb for...

Just tied it to the fuel shut off solenoid. Key is on, shut off solenoid is on, pump is on. Simple.

Well I don't know about "simplest things first" in all cases. We all do things in our own way I guess. I look things over first before...