Harry in Ky's latest activity

If you have an eight speed transmission this is a piece of cake. If it's a six speed, different story. I'd say the distance between the...

On the 1100 you would do it the old fashioned way. The tractor wasn't designed for a loader (or any other hydraulic attachments...

Fluid and filters are not your problem. If it bleeds down fast enough to see it, the valve isn't holding. Probably doesn't have any load...

Brand new mower and the tightwad bastards couldn't include a few ram stops?

Valid point, but most batwings use single acting cylinders which will quickly show leaking piston seals.

First thought would be the "kit" you purchased is slightly low on quality. In theory the valve SHOULD hold pressure in the cylinder(s)...

If the shoe fits....

The clutch is indeed a "normal wear and tear part" so you're right on track. Just be aware that if the clutch is replaced it won't last...

Not sure but I don't think they carry ready made hoses. As far as them making custom hoses, I would think that's an individual local...

TSC website shows that size hose for $18. Local store has only one in stock. If you need two, you're out of luck.

The first thing they'll do is check (and adjust) pedal free play. You say it has none. Well, I say it did back when it was working...

$152. Does that sound right? Not really, but it seems some places charge whatever they want for making hoses these days. I've been...

Seems there are a few too many ex spurts on board already.

Okay friend, but it sounds more like a slightly different bs term to me.

Use a pick and pry the inner race out? Then get all the balls out? And I take it you've had success with this method before?