Recent content by HIITMan

I'll give it a try

It has 5 wires

I changed out the plug, spliced the wires according to the old plug, plugged in the 30/40 amp relay. No change. I jumped the 2 wires at the relay plug, that seems to be the only thing that works.

Thanks, as soon as the weather clears here, I give it a try.

Are you saying to extend the wires from the hold socket to a larger relay? I bought a relay just like that one at Walmart

Could the higher amp relay cause any issues with the wiring? The original relay is a 20/30 amp, the 2 I got today are 30/40 amp. How would I wire from the hold relay to the pull relay? Could I just use a jumper wire on the hold relays 2 wires that I tested on?

Not sure what you mean by the second paragraph.

So are you suggesting to get a higher amp relay?

I’m going to try to find a couple relays today

The whit wire

I jumped the wires without the relay on the socket. Why wouldn't the other relay work when I swapped them?

I jumped the 2 wires, the solenoid plunger stayed in. I terminals where clean on the relay and the socket. I wired brushed them just the same.

Yes, had a light on the red w/black stripe. I could feel the relay click.

With the test clamp on ground, the blue w/yellow stripe had no light at the relay.