Recent content by Ira

I agree. If the 3rd function was standard on the CX2510, I would have tried it. If I had never known about a diverter, I would have paid for the Kioti 3rd function (like the dealer wanted me to do) and probably would have been happy with it not having anything to compare it with. Unfortunately...

I did some research to understand the difference between how a diverter and true third function operate. As I previously stated, I'm comfortable with the way a diverter works, and although I haven't used Kioti's 3rd function, I believe I would rather be able to feather the grapple opened/closed...

The flail mower is a Nova Tractor EF-155 light duty flail mower. It was shipped with 400 gram hammers (30 of them) and that's what I've been using. The hammers probably need sharpening, but I haven't been satisfied with the cut since it was new. I'm probably mowing at 2" cutting height, give or...

Tractor is a CX2510 cab. About eight acres to mow 50% St Augustine mixed with 50% weeds now. Nothing that a finish mower can't handle. I want it to ultimately have the "estate look". I have a 60" flail mower, but I'm not satisfied with the cut. I've mowed it with a MMM on my previous JD 4110...

Thanks for the info. Certainly looks just like the Woods TK60.20 which is one of the two alternatives I am considering. The other is the Land Pride 1660, which is $4K at the local Kubota dealer. $5K is the MSRP I got off the Kioti website. Looks like I should be able to get the Woods TK60.20...

Is this finish mower manufactured by Kioti or is it rebranded? Any comments (good or bad) about the mower? Thinking about getting one for a CX2510, but it seems expensive (msrp is $5000) compared to mowers from other manufacturers like Land Pride or Woods.

2005 JD 4110, 340 hours, hydrostatic, 200CX FEL, Frontier pallet forks, 60D MMM, always garaged, original turf tires, folding ROPS, located south of Houston TX. I don't want to give it away, but I don't want to wait it out for "top dollar". Suggested price?

I just put a deposit down on a new CX2510HCB. Dealer says it is a 2024 model and he received it about a month ago. Serial number is SX3DAnnnn. According to the previous chart, that would mean it's a 2017 model (pretty sure that's not the case), but tractordata.com says the CX2510 was introduced...

Tractor on dealer's lot has R4's. Getting factory R14's would cost me more than getting the Versa Turfs. I'm sure R14's would be better than R4's, but the Versa Turf reviews make them out to be the best tire for my purposes.

Can someone please verify that these Versa Turf tires are the correct sizes to replace the factory industrial/R4 tires on a new CX2510HCB, e.g., same wheel size, no modifications needed, no extra parts needed? Rear - Versa Turf 12R16.5 (SKU 6L13541) Front - Versa Turf 23x8.50R12 (SKU 6L13551)...

Thanks for the info. My only concern was that I might be missing some good enhancements available on 2025 models. The dealer said both tractors were delivered to them a few weeks ago.

Just found out that the two CX2510HCB's on the local dealer's lot are 2024 models. Saw it on the quote sheet but dealer never mentioned it. Both of them are new. Are there any differences between the two years? I don't know where to find any info/specs on the 2024 to compare against the 2025...

I have a 2005 JD 4110 ("MCUT", 20hp). I purchased it new. It currently has about 350 hours on it. Always kept indoors. It has a 60" MMM, but I have only used the tractor for mowing maybe 100 hours, probably less. My 5.5 acres was already cleared when I bought the property (neighbors referred to...

Summit said the generic diverter kit will work for controlling the grapple.

I did more research, watched a few videos, and I think I know a little more but still not enough. I understand the difference between the 3rd function kit and the diverter. As previously stated, I'm familiar/comfortable with the diverter so that's what I would like on a CX2510 if that's what I...