Recent content by jbt308

I did, checked everything and it seems to be in order, no blown fuses, clutch on AC engages, grills blown out. I ended up topping off the refigerant and it was pretty low, found some charts and it worked out. But I like your idea of fitting an extra screen up front. I don't do a lot of bush...

So is there a way to get around this? I've got a 2021 CK3510Cab and I'm wondering if you can use the "backhoe" valve as a pass-through without affecting the 3-pt? I am trying to hookup an additional summit rear remote to my already 2 existing rear remotes from the factory. I connected the summit...

Afternoon everyone, Working to diagnose an AC issue, does anyone have the system specs for the HVAC pressures/temps? Thank you!

Just as a follow-up. Checked the fuse, it was totally fine. Alternator shop cleaned out the alternator, looked quite good. Tightened the belt, tightened all bolts super snug, cleaned terminals Charging @ 14.4v.....no idea, think it was just a culmination of circumstances. Going to install a...

Will do, thank you!

Afternoon everyone, Recently discovered after doing some spraying that my tractor died. Checked the battery and it was dead, this is a new battery, less than 6 months old. Charged the battery and got it running and checked voltage across the battery, was only charging at 11.6v...checked the...

Reviving a bit of an old thread, but wanted to build off this. I've got a CK3510SE cab with the 3rd function up front and the 2 rear-remotes from Kioti. I've installed a hydraulic toplink using one set of the remotes, and still have the other port open, which I believe is for the constant flow...