Recent content by joesco

Thanks for all the input folks. Over there years I've install four block heaters in my tractors and if I recall my Kill-A-Watt meter displayed 400-600 watts. In some cases, after being on a timer for about three hours, I wouldn't even need my glow plugs to start them. I still have an old 300...

I'm a big fan of block heaters as I believe it greatly extends the life of a diesel engine and helps greatly in starting in sub-freezing temperatures, even though my tractors is always in a unheated garage. Is there a freeze plug on the Yanmar for a block heater. If so, does anyone have a part...

I have owned more than a dozen tractors over the last 40 years! KIOTI, Kubota, New Holland, JOHN DEERE, FORD, FARMALL and believe it or not a BELARUS! I recently sold a Kubota 2230 and purchased an LS MT122. 6 months of research and there is no doubt now I made the right decision! Power from...

Located in Southern New Hampshire

Asking 12,995.000 You are viewing a very hard to find Kubota BX2230, loaded with options, 2nd owner, with only 800 hours of home owners use (purchased it with 200 hours). I've maintained this to Kubota's specs, and just did a complete service on it. Options includes a Kubota LA211 Loader a...

What should a New Englander expect to pay for an EMAX 20S as I'm going to sell my Kubota 2230 Loader with a MM Mower as I can't find a new Sub-Compact Kubota and love Yanmar engines. Thanks for your opinions!

Taking delivery soon and I would like to install a block heater and have to assume that the bullet-proof Yanmar engine has a knock-out for one. If so difficulty and a part number would be helpful. Thanks!

My Kubota BX2230, Engine model Model D902-E is not charging my battery. The belt is tight and using a volt meter with the engine running my volt meter is only see 11.9 V. I've researched the threads and found that some folks have upgraded to a 40W Alternator, but using the two part numbers I...

Has anyone ever converted the 4 Gauge Wheels on the Kubota MMM deck to swivel? My old Zero-Turn had them and never understood why they are not on the Kubota factory MMM decks! Thanks very much!

Thanks Radioman, I do have a simple led toggle switch. So do I just use this connector and cut into the power (red) wire and connect the other lead to ground?

Just installed a set of 4 LED lights, two on the front of my canopy frame and two on the back. The specs on (each) light is 27W, 2.25A@ 12V. Thanks to members here, I used the spare wires set behind my seat. They work great but..... The concern is that when I turn on my ignition key to pre-heat...

I bought this Snowsport Plow for my Toyota Tacoma two years ago and thought I would see how it would mount on my newly acquired BX2230. I had one issue with the plow last Winter in NH and that's was during a storm when we were getting 3" per hour. I only made 1 pass during the storm with the...

I'm not overly impressed with the glow plug set-up in my BX2230. This morning, with temps in the 40's, I had to glow plug it twice to start him. I've searched and it appears I can only use an in-line coolant heater, but I prefer a block heater. Has anyone installed a block heater in this...

Folks, I did a search and can't justify a cab, found some nice canopies for around $400.00, but would like opinions and recommendations please. Thanks very much!

Update folks and again thanks for all the input! Yesterday, I took the PTO shaft apart. Most difficult were removing the plastic sleeves. 1. I removed the roll pin from the inner shaft portion and took the shaft to my local Kubota dealer. Much to my surprise he had one in stock. Did not know...