KennJ's latest activity

I rekeyed the ignition switch on my 2400h today. When I bought the tractor 3 weeks ago it only came with one key. I bought one of these...

There is no estate tax in California, You can shield your assets from federal estate tax with a trust. Most people leave California...

Well my replacement certainly can't be called "affordable", but I need(ed) a battery that can tolerate our -40 F (ambient) winters here...

I've so busy I forgot to post some updates and pictures. Got the pad all finished and finally got my shop built. Shops 20x25 lean is 10x25.

I shipped my starter back to the dealer for warranty replacement. Ran the tractor briefly on a recent evening, went to start it the next...

FYI, got the starter out and had it bench tested locally. Failed, so working on gettin a replacement under warranty.

Yeah, the engine is fine... I ran it the night before, went to start it then next day and nothing there.

I would agree that the starter is likely the culprit. The starter generally gets its ground by the mounting surface bolts, couldn't hurt...

Made sure the battery was fully charged. Checked the relays and fuses, checked the PTO switch and the neutral switch. The relay clicks...

Well, I'm 3 ½ hours from the dealer, and I have an offset flail mower on the back and the loader on the front, both sitting on the...

My starter seems to have failed on my Branson 2515H... I have one month of warranty left on it! You can't just buy a solenoid either...

Don't know if this was posted before, but its a good video. Good candidate for a pin too.

I mounted two similar ones, although a bit smaller, on the back of my tractor. It's amazing the amount of light those things output. Two...

Planning to add an LED rear work light. The stock light is sad. In the summer I prefer doing work as the sun sets. Adding a...