Tractor ran "fine" all last year. Fine is in quotes as the clutch was beginning to growl anytime it was pushed. All worked fine though when I parked it last fall. Started it up today to till the garden and it runs like a top but will not move in any range or in any gear. Clutch grinds pretty...
Okay I have taken the drive shaft off, there were 3 balls out in the front so I think that was the clunking problem. I have the front and back both packed with grease and all 6 balls pushed in. I believe that part is ready to put back together.
I also drained the transmission so I could take...
The 4 wd has stopped working on my 2310d. The lever by your left foot just swings back and forth. And also if you push the tractor it makes a "clunk" sound, does it when running also but you cannot really hear it. If you put your hand on the "pipe housing" part that runs underneath the tractor...
When I first got my 2310d a few years back I bought the operation manual and parts manual from Hoye. We moved and now I can only find the operation manual. Have some problems and now need the parts manual and also a service manual if one of those exists for this model. Are these available online...
I have an AC 8030 2 wd with a full rack of weights in the front. also have a 16' flatbed trailer with dual 8,000 lb axles but it has a ball hitch on it. I want to use this for hauling loads of firewood about 7 miles in the country......possible to hook this trailer to a ball hitch? Good idea or...
Here is the part. It is a 1968 4020. You darned near need to be a contortionist to get that thing out of there. It was leaking at the top fitting. What might this be? I ordered a manual but it is not here for a few days. Ill go o the dealer and order one i guess, no holes in the line probably...
I was running the shredder today and all of the sudden I could hardly turn the tractor, checked the hydro fluid and it was empty. Once I filled it up and started it fluid was basically pouring out from just above the brake pedal on the right side. It was also coming out just a little from the...
We are just about to finish our house and it comes with a 1/4 mile gravel driveway that needs to be maintained. I will also use it to keep a 1/3 mile dirt road at the farm operable a time or two a year. That will about be the extent of it useage.
I have a Yanmar 2310D to use. Probably going to...
Somehow over the winter, my OC has disappeard. :( I went to buy a new one and they come in 2 sizes. 1 1/8" to 1 3/8" or 1 1/8" to 1 1/8". Which size do I need for hooking up my 2310d to a bush hog?
Thanks,
Keith
I have a 2310d with a yanmar tiller. I have had it for 2 years and do my foodplots with it. I have one that is a little over 2 acres, one about an acre, and 3 that are about 1/2 acre. The tiller has worked very well, this is all farmland that was put into the wetland program 3 years ago and was...
I picked up a 2310d 2 years ago and couldn't afford the loader. Hopefully this summer I will be able to get one so I have some questions. This tractor had a loader on it but it was taken off when sold. The hydraulic lines were left alone and had quick disconnects on them and I have the other...
We had a flash flood here in MO, the water came up 16 feet overnight and submerged my tractor.
I found a little information in the archives by searching...but have a question or two.
I plan on draining the hydraulic fluid, front gear box, gas tank,and engine oil. Changing the air filter, oil...
Question on changing my oil in my tiller. From what I can find searching on here I need to change the oil in 2 places on the tiller -- the gear box which has a dipstick on top in the center of the tiller and also the chain box which has a dipstick on top on the side of the tiller. Both of these...
I know this is a YanMar forum, but I have to ask anyway. Are there any major differences in these two tractors for my use. My use is a little food plotting and some brushhoggin, possibly a FEL at a later date. Any reason to buy one over the other? Parts availability, maintenance issues?
Which...