Recent content by kjnwi

Hello- 100 hours on tractor. Water in fuel light, air filter light are on and fuel gauge flashes on and off while showing full. Temp gauge does not appear to be working either. Tractor runs great otherwise any suggestions? Should I order a new cluster?

65 hours on a Farm Pro 25hp. Runs good started tractor oil gauge reads 0. No smoke or unusual noise. Is it possible it痴 the gauge and is the pressure sensor in the picture below? Loose wire was taped to the loom. Gauge was working fine for the 10 hours I have put on the tractor.

It's a Cross 4Z3020.

The only detent I feel is to lower the bucket- nothing to the side.

Has anyone used one of these diverter kits successfully on a Jinma/ Farm pro? I finally have my Spirit loader (similar to Koyker, with a joystick) installed and functional and I壇 like to add a grapple.

Has anyone found (other than custom) these that work for these tractors, rather than the chains? I致e got a single tab under the rear axle so I can稚 use the Jinmas off the upgrade model.

I finally received the axle brackets I need but before I wreck something, has anyone removed these brackets before? I thought I could take off the rops and expose the 2 outer bolts but no dice. The fender covers them up. Is the fender separate from the upper axle plate and can I just pry them apart?

Does anyone use one of these on a 25hp tractor? I知 wondering if I have enough power for driveway work and trail building. Also do you need some sort of solid sway bars (instead of chains)? Thanks

I know this is an old thread- I just bought my 2006 with 25 hours on the tach. It obviously had been sitting a long time. Here's what my in tank filter looked like when I switched to this new sediment bowl kit.

Anyone mounted a Spirit loader on one of these? Looks similar to Koyker but it was off the tractor when I bought it. I bought a used SL-15 and while the frame brackets went on fine, the 2 bars connecting the rear mounts to somehwere in the back have me stumped. I dont think I have the rear...

Pictures of the button

My new to me Farm Pro differential lock lever is loose- no resistance at all. It falls to the down position and has no effect on anything. My wheels are not locked. I've looked at the parts diagrams but can't figure out how the outside arm connects to the internal shaft/fork/spring. Any...

I just purchased a Farm Pro 2524 and have the opportunity to buy a Spirit SL-15 loader for a good price. It includes the right mounts (no bolts) and joystick controller. I cant find anything online for spirit loaders in Waupaca Wi and the phone number I have for them goes unanswered and...