Recent content by kromc5

They overnighted an new on but it has start check, tech said it will need a soft update to get it talking the controller in the front.

The tech made it out and it was the control unit under the dash was causing the failures.

I disconnected the cameras but did not fix the issue.

Those both are original wires, only additions are positive and negative for the cameras.

Those two were tucked in behind the old battery when I removed it. I see no were for those connections to go but wanted to check.

The starter does nothing when I turn the key.

Been having to jump the battery for a couple months, they were unable to get one in and upgraded me to a gold one. It just barely fits and had to adjust the negative. Put in and today and went to get working and it has and exclamation mark on the dash. Will not turn over, radio does not come on...

Mulch pile was about to take over the driveway so I moved it back about 24 feet. Really enjoying the tractor it has tons of power and so far runs perfectly. Even with the grill full of mulch the temps did not move at all. The diff lock is easier to hold down as well compared the the 4320.

Not sure if many have thought of this but I have always kept a 1lb extinguisher in my 4320 and 2lb on my rentals. Looking over the nx I though i could get away with a 4lb on the back and it did fit perfectly. I could even cut some aluminum and raise it a few more inches. I have never had it...

Here's of few pics of my belly pan that I did, very simple had a square piece of left of material. I look under the tractor this morning and no dents surprising since its so thin.

Very pleasantly surprised again today by the nx, error came up and it was the water separator. The 4320 sometime was very hard to start sometimes after draining the water separator to the point of having to put the charger it. The NX started up perfectly and did not even have a rough idle...

If you are in the market for a Kubota I would recommend calling First Choice Farm & Lawn. I actually purchased a like new nx6010 and they represented the tractor perfectly. They were very easy to work with and delivered the tractor in two days from TN to NC after finishing the paperwork. John...

Uploaded few pics while cleaning the tractor today, thought perspective owners might like to see everything. Sunk it to the frame in front working drainage with all the rain. The reverse pedal felt sponge to me and while cleaning, I found it was hitting two different hoses. One the front and...

CADplans I don't think I have much choice, I sold roughly about $7000 in non I match implements to help with the new purchase, plus they were just to hard at times for me even with my pats. I just looked up the specs on the cat 2 i match but it is much wider and don't it will fit my cat 1...

Few Pictures Got to try it out today and after creeping out of the garage I found it has cat 2 links. I doubt I will ever run any heavy ground engagement implements. I going to call kioti, I'm not sure if I can just slide out the bottom links and replace for cat 1? If anyone know if this is...