Recent content by L3450

in this picture number 130 is the pressure / feed line number 060 is the return pipe

Looking at installing a set of rear remotes on my Kubota L3450 to operate the hyd. chute cylinder on a recently purchased (used) snowblower . Have been searching the forum and think that I understand most of the plumbing needed but could still use some advice . My tractor has the square hyd...

A little over 6 years ago we purchased a used Kubota from a local dealer , tractor was bare bone and since I needed a loader the dealer located and installed a Hardy 35ST . Flash to present day same tractor / loader but different much longer driveway so I picked up a used snowblower and find...

Anybody ever build a Scarifier Blade that mounts to / over the cutting edge of a loader bucket / something that could be used to scrape an icy driveway after freezing rain storms ?

I have a 1992 Kubota L3450 tractor which is giving me some lighting problems . Neither my headlights nor my rear work lights will work , i've checked the fuses for both sets of lights and have power on both sides of each (all fuses actually)the fuses. If anyone has had this problem and could...

Not sure how i managed it but i have water in the hyd. system of my backhoe attachment. (independent of the tractor hyd. system) Anyway my question now is "whats the best way to flush the system" should i start at the bucket cyl. and work back toward the valve bank etc . ???

In the first stages of Home designing for a build in the coming summer as such have begun looking at software . Settled on Punch , as we're on a dialup connection am wondering how much online time is necessary to get full use of the program . For instance is an internet connection needed for...

Need some advice on wiring /switch for rear work lights . Previous owner installed lights on ROPS and connected to exsisting wires on rear fenders . Lights work fine but draw power as soon as the key is either turned on or turned to glow plug position. I'm no mechanic and wiring is a...

Sounds stupid to most of you i bet but here goes , is my 1992 Kubota L3450 equipped with an open centre type Hyd. system ??

Has anyone here ever stripped down an old travel trailer to build a utility trailer out of ? Any tips / tricks a body needs / should to know before proceeding ? Its an old Glenelle 18 footer , tongue included in measurement !

Recently purchased a new Wallenstein GX700 backhoe . First usage revealed a very stiff control valve. (main boom ,had to moderately force lever) After futher usage(20 min.) valve began to move more freely but locks (detent style) in both lift & lower positions . Dealer /Mechanic says "stiff...

Recently purchased a new Wallenstein GX700 backhoe . First usage revealed a very stiff control valve. (main boom ,had to moderately force lever) After futher usage(20 min.) valve began to move more freely but locks (detent style) in both lift & lower positions . Dealer /Mechanic says "stiff...