Just wanted to share with everyone my steering box experience in case it helps someone else. My 1801 had steering issues, likely due to the lack of access to filler plug, a poor design, I found this aftermarket box on eBay and despite it saying not for 4 wd it works fine on my 4x4. New...
So I have a Mitsubishi 1801 I believe, I bought it non running and after an injection pump and engine rebuild it's now used and running. It has a loader but it is currently off the tractor and the lines simply coupled together to feed the three point. I have hydraulic flow from the pump but the...
So my tractor I bought non running appears to need a rebuild. The previous owner said it kept getting harder and harder to start then wouldn't. He had removed the injection pump, I got it rebuilt and also noticed a hole in the air cleaner hose and to my fear it appears the engine got dusted and...
I am not so sure I would want one up front, I know my side mounted flail kicks up a fair bit of dust and debris behind it at times, not so bad with a side or rear mounted flail, but in front why needlessly make the tractor and operator ingest that mess
My Mitsubishi tractor, 1601 I believe, has a 1" diameter thing on the dashboard labeled heat, at first I expected it was a buzzer or something to tell you the glowplugs were on, but upon further inspection it's simply a small heating coil underneath. Why? To warm your fingers or something?never...
I purchased a Mitsubishi compact tractor, the decals are missing from the hood but the previous owner thinks it was a "16...
something" from memory before the decals peeled off. I had a K3D engine and 52" wheelbase. All sheet metal is blue, chassis gray, and the serial number is TL8E-5923 can...
do these users pay a fee to have push there products here? and do they have other rights such as deleting posts that dis there product etc? just curious as i know there is one advertiser who has realy been stirring a couple forums lately
heres a few pics of my homemade fuel tank. i used a verticle propane tank, cut off the top and bottom collars and plugged the original hole, and welded in 3 tank fittings, 2 inch pipe thread, along the top, formerly the side of the tank. it holds about 120 gallons. the wheels are just for moving...
i recently bought a JD210c loader backhoe and it has a 4 post rops, factory made, got me wondering why not have rops like that on a compact or an ag tractor? seems like a great thing, protects ya better in a rollover, and from a log or pipe rolling off the bucket and down the loader arms, and...
i just bought a JD 210C and was curious if anyone knew what other machines may share the same bucket mount, i wasnt sure if the 310 and 410 used a larger mount or not and figured surely one of you guys has tried this before!
i wanted to make a little maple sugar this coming spring but didnt need anything too big, just a touch bigger than the way we did it when i was a kid, a campstove and a pan, so i set out to make a small wood fired evaporator for next to nothing using stuff i had around, the body of it is a...
i have a 89 dodge D250 truck with the 5.9 cummins. it has been overcharging the battery, i put a new voltage regulator on it, its the external type mounted on the firewall, and it was then charging well over 15 volts, i put the old one back in and it was back to a bit under 14.5 volts which is...
i have a gradall G3XR excavator, its a 35,000 lbs machine and i have been looking for a narrow trenching bucket for it, i see alot of stuff for the larger G660 size machines but dont know if the quick tach setup is the same, anyone familuar with gradalls? i havent found one around that i could...
just thought some of you might like to see some pictures of a loader bucket i have been building up at work. the bucket goes to a brand new john deere loader. the loader was bought for loading trash at a transfer station. the bucket is an oversized bucket designed just for trash, as ya can see...