Midniteoyl's latest activity

Oh, there are indeed a few things that fits that description. Sure, a 25K rated trailer is overkill for a 6,400 lb. load, but when it...

Def not good! I 2nd that you need to do a teardown..

I can see how that would work but we drive on the left here and the roads are all single track in any case. Thanks for the comment though.

Hold my na beer lol my bridge made with repurposed junk and cheap scamazon tools held my tiny tractor. With the forks pretty loaded with...

Also, agree on the Mobil 424 hyd fluid. Think its called Delvac 424 now.

Yep, was gonna say to 'burp' the foot pedals if its hard to get the range selector to move. Happens all the time on mine. My Diff lock...

Switch to direct wire LED T8 and ditch the ballast. Run both bulbs in parallel. You will have to change the ends in the fixture to...

There are a series of ratings, and unfortunately, much of the "ground contact" lumber sold in my local box stores is only suitable for...

Thank you TractorTYMe. I was in my barn at 5 this morning trying the reset procedure that you posted. It worked! Is this a secret? I...

JUST curious, have you tried this procedure to reset the DPF controller?

Haven't had mine apart yet, but as far as I can tell its simply removing the Snap Rings and pressing the Spindle out then tapping the...

Well even though the OP has bought his trailer I'll throw in my thoughts. I've looked and thought about dump trailers and came to the...

Yes, it seems like tractor 3pt, FEL, and BH work will often open up my Lynch Pins and losig them can allow a shaft to slide out and bend...

Just get some large “R”clips and push them all the way through until they’re hanging, brush and limbs are not gonna pull them out, been...

You will not regret buying a dump trailer, they go hand in hand with a tractor/loader. I use mine more than any other trailer. They even...