Midniteoyl's latest activity
-
Midniteoyl reacted to dodge man's post in the thread TYM wants to tip or roll over - need advise with
Good Post.
Tractor Time With Tim did a good video of the results of loading tires. They had scales on the front and back axle and forks on the... -
Used the Versahandler and Monster Grapple to pull some little 4x4 posts from an old sandbox:
-
Midniteoyl reacted to Bavarian's post in the thread FEL Lift Capacity For Unloading Semi Trailer with Good Post.
Truck driver here. I hauled wood shavings. And there is no way that a pallet weighs 2000 lbs. It is considered a light load at full...
-
Midniteoyl reacted to rebelback's post in the thread FEL Lift Capacity For Unloading Semi Trailer with Good Post.
You are 100% correct. A good friend helped me off load all 26 pallets yesterday with his fork lift. We loaded several on my gooseneck to...
-
Thats quality Chinese crap, not the usual Chinese junk [emoji1787][emoji23][emoji1787][emoji23][emoji23]
-
Midniteoyl reacted to ericm979's post in the thread FEL Lift Capacity For Unloading Semi Trailer with Good Post.
Measure the distance from the pin the loader arm pivots on (by the operator station) to the pins where the bucket or skid steer quick...
-
Thank you for that clarification. The rig has an easy life for what it is capable of doing. I wanted a 250 but the only way I could get...
-
Midniteoyl replied to the thread Milwaukee 18V impact gun?.Aren't you the guy that buys Bauer stuff from HF?
-
Midniteoyl replied to the thread Milwaukee 18V impact gun?.No, they are not. TTI owns Milwaukee, and they make Walmart's Hart, not Harbor Freight. They also make Ridgid and Ryobi power tools sold...
-
Midniteoyl replied to the thread F150 Transmission Service?.The F-150 has a 10R80, the most common transmission with these problems. The 6.2L/7.3L gas F-350's (yours) have the much beefier 10R140...
-
^^^ That was asbestos and no more dangerous than hardy BUT back then they cut them with a guillotine type shear. Saw cutting requires...
-
I agree that the 3/8"is the new 1/2" I have a Milwaukee M18 1/2" impact wrench. I just purchased a Milwaukee M18 3/8" impact wrench...
-
Midniteoyl reacted to brewdog's post in the thread Rainwater System / cleaning equipment and garden watering with Good Post.
I bought this 1100 gallon tank 2 years and finally got around to installing it. The water will be used mainly for watering the garden...
-
I'm the OP on this thread and let me thank everyone for helping and convincing me to buy a 3/8" battery impact gun for farm and shop...
-
Midniteoyl reacted to rebelback's post in the thread FEL Lift Capacity For Unloading Semi Trailer with Good Post.
I did a quick test tonight and was only able to lift 1400lbs of feed 3' off the ground. I'm going to do a pressure test to see if I'm...