Thanks all.
I think I’m going to put it together with the stock pump and see how it works and how much I use it. I suppose I can always add the crank pump after if needed.
Hi. I posted this in the Kubota owning/operating section but it might be better suited for this forum - I’m putting a 304 loader on a B7100.
The LA304 loader is rated for 4.4 GPM@2000psi. The hydraulic pump on the B7100 is 3 GPM and supposedly somewhere between 1500 and 1700 PSI.
I only plan...
The LA304 loader is rated for 4.4 GPM@2000psi. The hydraulic pump on the B7100 is 3 GPM and supposedly somewhere between 1500 and 1700 PSI.
I only plan on using the loader for yard work, snow removal and fire wood. (No commercial landscaping digging etc.) Will the stock hydraulic system on...
Things are progressing slowly but now I’m scratching my head looking at the bucket rollback angle. I found some specs online showing the maximum roll back angle for the LA304 is 25 degrees. I’ve eyeballed mine to about 27 degrees and it doesn’t really look like it would scoop too much up at...
Lil Foot - thank you so much. That gives me a solid frame of reference and hopefully I’ll be able to get somewhere in that ball park.
I think with the 304 my posts will need to be a bit higher but I’ll try to get the reach at ground a bit shorter than the 48” I was planning on based on what...
Hi.
I’m trying to shoehorn a la304 loader onto a B7100.
If anyone has either a b7100 with a loader or another tractor with an La304 loader, I could really use a favour.
If you could post a measurements of the height from the ground to the pin at the boom (where it mounts to the upright) and...
Hi.
Has anyone ever shoehorned a LA304 loader onto a B7100HST?
I picked the loader up yesterday - too good of a deal to pass up even it if I can not make it fit.
I have to fabricate a subframe for the tractor to mount the quick attach arms to, but a quick look at the boom arms tells me they...
Hi Folks.
I've been trying to find a Kubota 1630 Loader to fit my B7100hst with no luck so far. I have been able to find a 1640 though which is supposed to fit a B7200.
I found a thread from a long time ago with someone saying they were going to take a crack at making a 1640 fit on their B7100...
Hey Folks,
Id like to get a log splitter attachment for my B7100. One of the splitters I'm looking at specs a minimum hydraulic flow of 4 gpm@2700psi I downloaded the shop manual and it looks like the pump on the B7100 does just hair under 4 gpm but only 1710psi.
What would be the...
Hey,
I haven't had much luck yet in finding a used 4-5' rear mount snowblower but I have found a 4' front mount Kubota b-2551 blower for sale.
Front mount isn't my first choice because I would eventually want to add a FEL to my tractor (plus I don't have much experience with hydraulics).
Are...
Would having a PTO generator be better/more practical than having a stand alone generator. I've got a 7500 watt gas backup generator sitting in my garage - it may have 20 hours on it and I don't think I've fired it up in 3 years (local grid has been way more stable since when we first moved in)...
Hey folks
I just picked up a '93 Kubota B7100HST (4X4, 16 hp) and will be needing a rear mount snowblower for it. According to the owners manual the recommended max weight of the blower is 350lbs.
In checking the local online classifieds I don't see any 3 point blowers under 5' - is that...