Recent content by Nighthawk1169

I have the 6 foot Ford 907 or model # 22-124. I need a ground gage roller. Or I may part it out. Brand new set of duck foot blades, new side carrier bearings and housings on the cutter drum. Good belt, and tensioner, good gear box. Not sure if I want to invest in having one made at machine shop...

Possible water in the temp sending unit shorting to ground replace the sender?

Instrument gauge cluster is part # CY-1A8160-56100 Instrument harness is part # CY-1A8160-56210

Gentlemen i have found some info on this issue and many members have reported similar issues. there are three wires going to both temp gauge and fuel level gauge they are RED, Black, and Yellow. the wires represent the following Red= 12 volt power Black = constant ground Yellow represents...

Gentlemen i have found some info on this issue and many members have reported similar issues. there are three wires going to both temp gauge and fuel level gauge they are RED, Black, and Yellow. the wires represent the following Red= 12 volt power Black = constant ground Yellow represents...

Hi everyone, i have the same issue with the temp and fuel gauge on Cub Cadet Yanmar EX3200, did anyone ever get this resolved or insight. very frustrating mine works sometimes and sometimes not. they are both affected

Hi everyone, i have the same issue with the temp and fuel gauge on Cub Cadet Yanmar EX3200, did anyone ever get this resolved or insight. very frustrating mine works sometimes and sometimes not. they are both affected

Hi everyone, i have the same issue with the temp and fuel gauge on Cub Cadet Yanmar EX3200, did anyone ever get this resolved or insight. very frustrating mine works sometimes and sometimes not. they are both affected