Recent content by npartist

  1. N

    Videos: 2016 Toolcat 5600 at work, mowing, tree stump, plowing, etc...

    I finally did the switch to truck tires, Toyota Tacoma 265/65r17 on 17x7.5 +30mm offset wheels. Fit with no rubbing (i've driven on them loaded off road since and nothing seen even with lifting tires off the ground in ditches). Full video on the install and findings/learnings
  2. N

    Toolcat Rims and Bolt Pattern

    I finally did the switch to truck tires, Toyota Tacoma 265/65r17 on 17x7.5 +30mm offset wheels. Fit with no rubbing (i've driven on them loaded off road since and nothing seen even with lifting tires off the ground in ditches). Full video on the install and findings/learnings
  3. N

    Bucket link Hack...

    JP Fab Shop on Facebook makes the mod you are referring to.
  4. N

    My Fix -- Error Code 50-08 FPR Multi-Signal

    Yes, not a bad idea. I'd much prefer to work on it in my barn but I've known one big downside to these Toolcats is that they are a PITA to move if they don't drive on their own. I could have taken the full switch mount off the steering column but it was late and I was limited on time to get it...
  5. N

    What do you consider 'high' hours on Toolcats and what to look for on higher hour machines

    that's my chart from my Used Buying Advice video. My understanding is that the diff lock was optional but I could be mistaken?
  6. N

    My Fix -- Error Code 50-08 FPR Multi-Signal

    I read about error codes on here from time to time and have read of many causing the toolcat to not move/drive. Today I got code 50-08 and my 2016 Toolcat 5600 refused to budge, of course partially blocking the driveway. I checked the Fuse #10 in the fuse panel above the throttle pedal, all...
  7. N

    MTL Attachments XC7 60" Brush Cutter

    Latest video, mowing atv grass trails with brush cutter
  8. N

    Videos: 2016 Toolcat 5600 at work, mowing, tree stump, plowing, etc...

    Latest video, mowing atv grass trails with brush cutter
  9. N

    Videos: 2016 Toolcat 5600 at work, mowing, tree stump, plowing, etc...

    It's been a while but made another toolcat video with it plowing about 10" of wet snow on the concrete driveway.
  10. N

    New Toolcat Purchase

    Sweet!
  11. N

    Videos: 2016 Toolcat 5600 at work, mowing, tree stump, plowing, etc...

    Probably not news to any of you but here's how I control my hydraulic angle non-floating snow plow
  12. N

    Videos: 2016 Toolcat 5600 at work, mowing, tree stump, plowing, etc...

    Finally got around to adding a backup cam (and "dash" cam) to my toolcat. Front cam helps with seeing the front passenger corner of attachments and rear helps backing up and watching the 3 point.
  13. N

    Toolcat moving slow

    really interesting... I wonder if it learns itself after seeing vehicle speed too slow for too long?
  14. N

    Running LEDS for Toolcat

    You can get version of the LED bulbs that don't have the 90deg connector so they are "plug n play" on the front lights: https://amzn.to/32O5mbB Edit: Sorry, for some reason Song Dogger's post didn't show til after I replied. Similar answer, this is a 4 pack and advertised as 7000 lumens each.
  15. N

    Toolcat is an amazing Christmas light decorating tool

    This is when I first picked up my used toolcat, close to christmas so I "wrapped" it for myself. Hard to tell due to the angle and background but that's a lit xmas tree in the bed!
Top