Recent content by nyen0004

Hey Everybody, I am in the process of installing a two spool valve on my JD 2320 so I can have two sets of coupler's at the rear of my tractor for attachments. I know that I need to attach the new SCV to the auxiliary plate just behind the loaders SCV, but the thing I need you guys help for is...

I was thinking of doing this to my 2320 also and found this kit LVB26166. To me it appears to connect underneath the loader control valve, I checked on mine and its has two allen head set srews plugging two holes with I'm thinking is where it hooks up. I posted some pics of the set-up and...

We got around 9 inches of snow last night, and it is really heavy, sticky and wet so it will be a good first test for the blade. Here are a few pictures of it in action.

Here are a few pics of the blade mounted. You can see in the second picture how much it clears the wheel width. When blade is angled it is just wider then the wheels so I never drive over the snow.

Will be trying my new home made plow this winter.

Hey, Sorry its taken so long for me to get back to you guys. My daughter is taken up a lot of my time but I manage to squeeze in a little work every now and then. Good news ITS DONE. Here are some pics.

Welded up everything today except for the spring return mechanism. I ordered the springs today so I should get them within a couple days. The picture taken from the rear of the tractor shows that when the blade is angled it still clears the tractor width by a good 3 inches.

Here are the pics I tried to attached earlier.

Did a bit of tacking tonight. Here are the results.

My little girl.

Picked up the blade Wednesday. Here are a couple pics, everything is just loosely fitting together. probably start assembly this week.

Here are a couple picks of the parts I made minus the ones the metal fab shop has.

Here are a few pictures of my design. Probably going to start building this week.

I have a JD2320 (24hp 4x4) and made the blade in the pics for my loader. The blade is 6 feet wide and 24" tall. I decided not to make it angle to avoid destroying my loader as on these smaller tractors they are not the strongest. I also didn't make it with trip springs to keep the build...

Hey everyone, I just got myself a Front Quick Hitch for my 2320. I am going to build a blade for it then later on maybe a blower since I also got the drive shafts. I am in the designing stage right now should be starting to build in a week or two. It going to be similar to the blade I build...