Recent content by Pabco

Has anyone taken off or replaced the "U" shaped bracket stabilizers that connect to the lower (3-point) link to the stabilizers? I bent one and need to replace it. However, with a BH frame it looks like the lower link won't slide out. Is it possible to loosen the center bolt and slide the lower...

UPDATE: Apparently Kubota (thru the guise of a zerk fitting on the ratchet) insert pins or a pin into one of the screw on leveling links. When you go to unscrew it, as it gets to the end the pin screws up the threads, so that you can't screw it into the (new) ratchet. Took the ratchet to my...

Hi all - I am considering the addition of a 3rd function valve on my 2019 Kubota B2650 so I can install an EA Wicked Grapple. Question, is there a preferred 澱rand you all would recommend over another for my application? Things to stay away from or beware of?

MPSmith60 - They sure don't. Part came in. Here's the deal. What the option is, is a replaceable ratchet center section (which you can swap out on your link). It seems very well made compared to others I've seen. $119. The Kubota parts manager brought out a factory link to show me the install...

I am looking to replace my manual factory (adjustable) side link with one of the crank type (see image below) on my Kubota B2650. They seem to make them for everything but Kubota. Appreciate any help locating one that will work with my application.

Got tired of cleaning soot off FEL from engine exhaust stream. Made the following mod: Cut off about 1.5" of existing exhaust pipe (after removing spark arrester @ end); Cut down a standard 1 1/4 EMT prebend conduit as necessary; Drill tap a couple of new holes. Problem solved. Total cost...

Thanks Jeff9366. Nice rig. I did install a Bxpanded Piranha Tooth Bar , and do love it for all sorts of reasons.

Hello all. New to the forum. I have a Kubota B2650 and have been researching landscape rakes. I really like the ETA rakes, but I am out of their 1000 mile shipping range. I have read a lot of posts on rakes, but have not seen any addressing rakes that allow a 360 degree spin vs only turning, say...

Hello. I'm looking for some input from people who have added (rear) wheel weights to their Kubota. I have a B2650 and am lookng for folks who are pleased with the product they chose for their tractor. I have several acres which have some uncomfortable slopes I need to work. Just looking for a...

Greetings, Another newby to the forum. Just retired (as an Electrician) and purchased a few acres and a new Kubota B2650 with FEL and BH77 backhoe, and love it - all 40 hours of it anyway... Installed a couple of 50cal ammo cans for tools, chains and straps. Added a couple of quick PVC tubes...