One last question if you don't mind me asking, which way does the fluid flow? Could the filter be stopped up and causing back pressure at this fitting (if it flows towards the filter)? I haven't changed the filter since all this started.
Thanks for that. The first time I used the genuine $9 o-ring from NH. The second try I found it's a P16? or something like that. I don't have the size handy. I think I have the right size.
Sorry for the delayed visit back here. The hydraulic line is not perfectly positioned. I've tried to bend it to relieve any strain on it. Do you have any tips on how to get it perfect?
I’ve changed #11 twice and I can’t get it to stop leaking. Very little is leaking through the weep hole. Any advice is appreciated before I start spitting the tractor.
BTW if anyone needs a page photo out of any of the service manuals, I have them all for the 1530/1630/1725/1925, etc.
Hi folks, I pop in here now and then when my stuff is broken. I appreciate the information shared. My starter has gone bad twice in a couple years. The pinion gear in this case is slipping. Solenoid is good. Are there differences between the models? I see two different variations on Amazon...
Folks, anyone have the part number for the pull shutoff cable? I tried ordering one off Amazon and it was the wrong one. I don't have the patience for getting the wrong one again.
I looked around for the parts to make my own or to mod the one I was sent, and no luck.
Thanks!
Hi folks. I have a 1925 and the threaded inserts that hold the under-dash cowling on are either gone or spinning. The bolts in the middle can probably be drilled through and a nut put on the back. But the ones that hold the cowling to the firewall I have to fix differently. Anyone had luck...
I wasn't sure where to go with this. I bought a generator driven by an antique Yanmar TS155 15hp diesel engine. It's kinda fun - has a hand crank and a big flywheel. I bought it not running, claim was the primer lever wasn't returning right. I figured it would be a fun learning experience to...