Popgadget's latest activity

  • P
    Popgadget replied to the thread Good morning!!!!.
    Good Morning 66°, high in the middle 80’s again under a sunny sky. Didn’t accomplish much yesterday afternoon, helped a neighbor setup...
  • P
    Popgadget replied to the thread Good morning!!!!.
    I’m not sure that I need that level of protection, and I doubt that the audio quality would be as good for music. I do have a similar...
  • P
    Popgadget reacted to m7040's post in the thread Good morning!!!! with Good Post Good Post.
    I have resorted to using a helmet with blue tooth and phone answering to protect from branches while mowing around trees which is often...
  • P
    Popgadget replied to the thread Good morning!!!!.
    I was in the same boat, all of my 18v tools are Makita (except a Milwaukee fence stapler, which has a 3D printed adapter to use Makita...
  • P
    Popgadget replied to the thread Good morning!!!!.
    Good Morning. 66° and sunny, high in the middle 80’s. Another nice day to be outside. Yesterday was a day of puttering. A little bit...
    • IMG_7051.jpg
  • P
    Popgadget replied to the thread Good morning!!!!.
    My Lazer is the same. It has only two grease fittings, they are on the arms for the spring loaded idlers.
  • P
    Popgadget replied to the thread Good morning!!!!.
    Good Morning 65° when I woke up, sunny and going to stay that way with a high of 80°. Yesterday kept me moving all day. Started with a...
    • IMG_7046.jpg
  • P
    Popgadget replied to the thread Good morning!!!!.
    I used a belt sander with 80 grit belts when I repurposed a piece of used 3/4” plate into my welding table. It worked pretty well.
  • P
    Popgadget replied to the thread Good morning!!!!.
    Good morning 58° and sunny. High in the middle 70’s. Going to be an absolutely perfect day to be outside, which is a good thing. There...
  • P
    Popgadget replied to the thread Good morning!!!!.
    For me the trigger was over 1000sq ft of disturbance. Fortunately I was able to get an exemption based on my total impervious surface...
  • P
    Popgadget replied to the thread Good morning!!!!.
    I got all the open areas and the trimming with the Lazer done, blew off the patios and walks, and mowed the runway. Blew off and parked...
  • P
    Popgadget replied to the thread Good morning!!!!.
    Good Morning. 80° and humid out there, thunderstorms on their way. Yesterday was another inside day, spent a lot of time scanning...
  • P
    Popgadget replied to the thread Good morning!!!!.
    I have the Makita that telescopes out to 13’. It takes two 18v batteries. Works well, but gets heavy quickly if you don’t use the...
  • P
    Popgadget replied to the thread Good morning!!!!.
    Good Morning. Already 72°, DP 71°, going to be another unbearable day outside with a high of 95 or more. Yesterday’s trip made me...
    • IMG_7018.jpg
    • IMG_7021.jpg
  • P
    Popgadget replied to the thread Good morning!!!!.
    Good Morning 73° DP 72° this morning. I first thought it was foggy outside, but it was my windows all covered with condensation. High of...
    • IMG_7016.jpg
    • IMG_7017.jpg
Top