Recent content by RandyHut

I may be the only one that doesn't know this? My quest for info it appears to me that the Mahindra 2816 is Almost IF NOT Identical to the Cub Cadet 7305. I have compared parts lists and they are almost part for part the same? so if you need a part for your Mahindra 2816 your Cub dealer may be...

Just purchased a used 3PT 7" Finish mower. It had the blades on upside down, the guy wondered why it wasn't cutting tall grass, just bogging down his 23hp tractor. when i took them off to turn them over i noticed what appears to be a carbide or coated where they actually cut. Has anyone seen...

Does anyone have a picture of the mounting bracket that the hydraulic filter attaches to? I don't want to remove my filter to look at it if i don't have to. Thanks Randy

Has anyone considered replacing the small fuel filter with a larger spin on type? My 2816 has a real small filter cartridge that seems to clog easily. Am considering adding a small spin on fuel filter. My 2011 has only one season on it 110hrs and it has been a real issue, at least 3 or 4 filters...

I have a small BH attachment that has a 12" bucket. I also have clay and trying to get this bucket to empty is a problem. Anyone have any ideas for me to empty the bucket when digging? I was thinking about making a bucket emptier of some kind? I am sure i am not the first with this problem?

I have a 2011 Mahindra 2816 gear machine with 111 hrs. The FEL seems weak and while dumping the bucket it gets to a point and seems to slow down then goes ahead and dumps the rest of the way. If i try to pick up a whole bucket of gravel from a pile it just doesn't seam to want to pick it up if i...

I purchased a KK 5' Finish mower Used. I set it up for it highest cut, and it scalps the ground. Has anyone else had this issue? I don't see any further adjustment of the arms that hold the wheels. i can mow with it, i just cant drop it all the way down on the wheels, i have to hold it up with...

Hi, I have a prince selector valve that has become very difficult to switch from one position to the other. Does anyone have any ideas as to what might be the cause? Randy

My backhoe arm that raises and lowers the bucket moves to quickly when the lever is moved, is there an easy way to slow it down? All else works fine, just this one cyclinder.

I have a 2.5" dia x1" bore X 1.5" long piston that i need a replacement for. It was bypassing internally and when i pulled it apart i fond that someone had flat spotted it. Does anyone know where i might find one? Thanks Randy

I have a friend with an older Belarus 250as- it has one set of rear hydraulics already and he wants to add a second set. What do we need to do this? Materials needed - Hydraulic schematic? Thanks Randy

I have an older 3pt backhoe that has a dinoil hydraulic control valve set. The section that raises the Arm that the bucket attaches to extends then bleeds off real quickly. (it raises and then falls at a fairly quick rate when you release the handle of the valve and it goes to neutral position)...

If iam looking at this correctly the BH has the return in T1 which is PB i think. It has some sort of adapter in T1 with the hose. Is it possible that the H is setup for PB and missing the tank return hose at T?

Am i thinking correctly?? option 2?

Here is both ends - hope this helps