RBsingl's latest activity

And I will add to the others to get the glow plugs working before you go further because these little Kubota engines are extremely cold...

Check the glow plugs, they can be tested without removing. I would do that before anything else.

The engine on my B7200 is VERY COLD BLOODED! It will not start without a good amount of time on the heaters. Count of ten MIGHT get it...

Hi, Background: Here is a project I started about 2 years ago. Since I retired (2016) I've wanted to build a rotary cutter that...

I’m a pilot (and former flight instructor). I also used to work for a company that heat treated steel wire by running it through molten...

I fortunately don't have to deal with really steep slopes on my property but if I did there would be a pair of wheel chocks staying with...

Neighbor did that once as well [emoji23][emoji1787][emoji23][emoji1787][emoji1787] I spent a weekend aligning my deck, got everything...

Is it necessary to remove the fan at all..?? Try slipping the belt over one fan blade at a time. Should be enough room for it the belt...

The OEM Denso starters and alternators are far superior to any Chinese knockoff ones and worth getting rebuilt and are 100% rebuildable.

If your generator setup requires switching the main breaker, instead you need to have a properly installed shutoff switch ahead of the...

Although my ATS can be programmed to automatically run a regular test/exercise run, I do a manual test instead once a month and this is...

Even without any slip, minute dimensional differences in the pulleys would "un-time" the blades in a short time. Travelling at high...

A multiple spindle mower deck belt pattern shows the middle spindle has much less belt to pulley contact than the outside spindle...

Back When, I wanted an ongoing Reminder to Self..... (still needed, by me :cool:), and figured maybe a couple of people would stop...

Da Kats, taking one for the team ! Your comment about flash-over, reminded me of seeing a crew, many years ago, power-washing...