rScotty's latest activity

That's right, and I'm glad you brought that up. I was just looking at our older LandPride and even older Big Rhino brand back blades...

For a machine of that size your going to want a cat 1/2 capable rear blade. Alot of these rear blades have nearly no rear support and...

Welcome, and hope you have a good time with it. Go slow until you understand the controls. The tiller attachment - actually, any rear...

Used to change my old used up kubotas yearly usually in fall or spring then realized how clean fluid always was, amount of hrs I was...

I've found that the more adjustments the grader blade has the better work it can do. A 7 foot seems to be OK to handle, but an 8 footer...

If you do try a compression test, be sure to use a Diesel Compression Gauge. It goes to 1000 psi - much more than you can hold by hand...

I still think you should at least take a look at the fluid to see if air is being entrained. It meets the symptoms. But if it is not -...

The hydraulic pump can suck significant air in through a pinhole leak that won't leak oil to the outside. At most, it just makes an oily...

There is a thread with a similar problem right now. The final fix hasn't been found, but a suction air leak is my guess. And your...

In the Texas oilfield and farm we used to have problems with grease compatibility - at least we thought compatibility was the reason...

The reason why SLR doesn't work with simple 2 pi calculations is beause when a tire is loaded the axle is no longer in the center of a...

I feel you are going about this selection incorrectly. The first thing is to consider what size tractor is applicable to your needs...

That's right, except that the only number you really want to compare is the "Loaded Rolling Circumference" - sometmes known as just...

FFF = Fuel Filter First

You are asking a pretty complicated question. But here is a start... Look at your high pressure fuel pump - the one that runs the...