Got a MF-240 with 3 cyl Perkins diesel. About a year ago I replaced seals on throttle and shut off shafts now have a new leak. Its dripping fuel off what I think is a banjo bolt on bottom of pump onto oil filter below it. Thought it was coming from inspection cover to the left but after cleaning...
I bent the PTO shaft while bush hogging this spring at a remote piece of property. My dumb a** forgot to bring the shaft home with me so I could order a new one.
Is there a standard size for these? Would like to have the new replacement in hand when I return in a couple weeks. Its 8 hour drive...
Getting ready to replace the fuel filters on an older MF 240. According to Agco online parts manual both filters are the same. Is this correct? Just assumed they would be different micron ratings like most primary/secondary setups.
Anyone ever replace this setup with spin on filter heads? Looks...
Looking for advice on how serious/expensive this might be to fix.
Late 70s 245, draft and position levers stuck together. Will raise and will lower, but no in between. If moved at all much lower than full up position the arms start to drop. Previous owner said was working fine until he forced...
I am looking for the part number (or even better the part) that the steering cylinder attaches to. Its a bracket mounted to the side of power steering equipped tractors. Anyone have one or know where I can find one?
Its marked with a red X in the pictures.
Trying to install parking brake on my 245 that was missing it. Setup is nothing at all like my 150. Anyone have a pic of theirs that that could post? I'm including a pic of my 150s brake, and a pic of the 245s replacement park brake kit. Can't seem to get it on right.
Picked up a 245 with Bush Hog 2345 QT loader. Loader was removed by previous owner as soon as he bought it, so he was no help on it's operation.
Has a TS300 three position valve in front of seat. From there 2 hoses run to two 2 way valves, then on to 2 quick connects on rear fender which the...
Picked up a non running 1530 with a 143 loader. Got it running and have a few issues I wanted opinions on.
1 Hydraulic pump making a lot of noise when not under load. If I turn the wheels or operate the loader noise goes away, but immediately comes back when not in use.
2 Thought fluid might...
Thanks guys for all the help. Going to try and install pistons, rings, and liners myself. If I get in trouble and need help found a local guy who will do it for $400 in labor costs. Looking at kits now and will probably go with Agkits or Sparex as both seem rated pretty good. Once started the...
Have a chance to buy a low hour (less than 3000) 1 owner 150 with fresh paint for a good price. Tractor had been sitting for many years, was given to local body shop as payment for painting owners van. They in turn painted it to help it sell. Wish they hadn't but oh well. Long story short it has...
So was blading the driveway with the 40 the other day when it started missing real bad. Almost like ignition turned off, then it would recover then do it again few seconds later.
Not sure if its electrical or fuel related, and since I cant describe it very well I posted a video on youtube so...
Found a nice JD 40-U that I plan on buying. Anyone know if it will fit on a Uhaul car hauler trailer? They can handle up to 5900 pounds so weight is not an issue, just wondering if the deck is to wide for the tractor. Anyone done this before?
I hauled a MF 135 with one of these and it worked...