We bought our small place with a great pipe entry way and 65% complete around the property. I believe they stopped due to hitting a shale ledge that is exposed in places and only covered by 6-8" of topsoil in other places. To make matters worse in the final corner there is 30-50' span across a...
Mower is riding high in the back. Moving the wheel adjustment caused the wheel not to contact the ground before the mower. Adjusting the top link helped but caused the lifting and lowering feature to not work right. I believe it's th sq160 model.
I need to bring my tractor in to the dealer but do not currently own a trailer. They want about $100 one way. From what I can tell I need about an 18' and 20' would be even better for my needs. Would like to be able to throw a 6' disk my massey 135 and bush hog on the trailer for transport...
Front of mower with cover off
From the front looking up at head.
From right side of motor.
Its a Husqvarna with Kohler Cougar Motor. 20HP
180 hours.
It doesn't seem like its leaking from the head but further up. Not sure what the metal box with the OHV stamped on it is has a line to...
I have a '69 Massey 135 with a CAV injector pump. I've searched the site and come across a good deal of information as I have a very common leak at least at the fuel shut-off control among other places. Most have said its really a pretty easy job and my Massey Dealer said they sell a Seal kit...
Went to napa and bought a replacement filter for my Massey 135. I was surprised when the filter seemed quite a bit smaller in diameter than the housing. Also the filter that was in the tractor was closer in size to the housing. The o rings provided all fit perfect and the height was the same...
So I can sound ignorant here and not at the part store, what would the part number for a 3 wire 10si alternator be at napa or other popular part dealer? Can I walk in and they would be able to help or do they have to have a year and car model to get that figured out?
Ive searched the site and got lots of information for the exact problem but the solutions scare me.
Tractor is a '69 Massey 135. Has the perkins motor and CAV pump. The pump is leaking out of the shutoff switch. The threads have all said tear it apart and replace the o rings but then have...
Noticed some burnt oil smell when running my 20, 46 riding mower. Looked to be mainly out the front of the motor. Haven't investigated it more but wonded if this was a common fix with a possible easy gasket solution.
Ironically this happened minutes after I bought a full size tractor...
Tried google and didnt get much information. I got it with my tractor but wasn't sure how heavy duty it was supposed to be. Seemed to take out1.5-2" scrub oaks but I was worried I was way over doing what was probably considered safe. Anywhere to find a bit more information on this cutter?
All of the words a pictures from y'all helped greatly. Got everything together and finally have position control. It was either from a spring binding or just being beyond dirty. Got a new $50 filter for it and 8 gallons of fluid and appear to be in business. Thanks again. Tackling the...
It seems there are two drain plugs on the tractor, one on the left side near the axle and one right under the shifter also on the left side. It is right next to the cotter pin, but there is no way to get a wrench around it. I got all of the fluid out from under the lift cover but I was...
Working on scrubbing down the lift cover and when moving around the guts of the response control came out. The spring is in the valve still, is it needle then other piece on top. Is there any other parts? Trying to reassemble tomorrow any help in a hurry would be great.
Seemed pretty clean after 40 years....
Thinking this may have had something to do with the levers not functioning properly.
The OSHA approved rig that made everything possible. Guys aren't lying when they say the lift cover is heavy!
Does the hydraulic fluid look terrible? I believe it...