Shawn T. W.'s latest activity

Try this? https://cartitles.com/how-to-get-a-bonded-title-in-florida/

See if Florida has a process to get a title for an abandoned vehicle. I handled many of these in my day working Code Enforcement. As...

It’s a 2009 Kia Rondo, not a desirable car I know but it has 91,000 miles It’s not beat up, small dent in qtr and fading paint on hood...

First $50 takes the Pat's.

I once used a 6' Bush Hog Squealer behind a Kubota L3200 (31 or so HP, less at the PTO) and found that at times, it would struggle in...

Technically I get my grease for free from the truck stops . . . I'm a long distance truck driver and I get anywhere from 1-7 points on...

Another one for the used oil and diesel. Let it sit in the sun after applying. I always use gas engine oil never diesel. Just a bit too...

That's awesome that so many people say used oil. I was scared to try it. And I always have lots of fairly clean used oil I am bringing...

I have used Thompson's on my trailers as well as the rental trailers where I used to work. It's garbage as far as I am concerned. Now I...

For a slasher/shredder/brush hog/rotary cutter general rule of thumb is 5 PTO HP per foot of cut ... But that's just a general rule ...

That's like saying you have a 2" trailer hitch, and you need to buy a truck to fit that. How many acres? Wooded or open? Hilly or...

I use used hydraulic fluid mixed in with diesel fuel and roll it on with a paint roller, it work best to let it set out in the sun on a...

50/50 used oil and diesel, put it on with a paint roller and leave it in the hot sun for a day or two. Not had any problems with it...

Heavier is almost always better with tractors. It will help with stability (safety) and traction. Most of us try to add weight by...

My manual, cautions about lowering a load fast on the FEL and stopping suddenly, having the potential to damage the hydraulics. That's...