Recent content by stancel

I have over 50 and yet to see the light but I am not doubting you. This came from a salesman. Only 1 small step up from a politician.

I hate the emissions BS also, but the CK3520 only has a regen button. No DEF. The dealer told me you might go 500 hours before ever hitting that regen button so it was a non issue for me. If that is true and it takes that long to require the DPF to need regen then the machine is extremely clean...

I've owned about all of them at one time or another. Couldn't care less about emblems, paint color or corporate names. Times are changing fast and lots of the new comers are offering higher quality for the same or less money than the brands with a loyal following. All that being said, I...

Thank you!! I found a wiring diagram for a CK and saw it had a start circuit that everything fed into, but I didn't know if mine had it and where to find it.

Unfortunately I don't have a wiring diagram for this thing.

I ruled out the solenoid because I get no voltage at the solenoid harness when I turn the ignition key to start. I should be getting about 12v.

I have had a CX2510 for almost 2 years. It is a great machine. I do find it a little tippy when I am using my forks with moderate weight. It also seems a little lite in the ass, even with fluid filled tires, so I have to hook up a counter weight if I am lifting a lot of weight. I also really...

I am out of ideas with my CX2510. It will crank when cold, but once warmed up it isn't getting power to the solenoid and doesn't turn over. I have checked the PTO, Neutral, and Clutch safety switches and all have 12v passing through. Tested starter relay and ignition switch and both are good...

Kubota mower deck. Gear box locked up. Everything else is in good condition. Has some rust but not rotted. New belt. $500. I'm in southern Mississippi.

Hope I am posting this in the right spot. It isn't really for sale at the moment, so didn't want to put it in the classifieds. Looking for the value of a 2006 Kubota RCK60-24B belly mower. The mower is in very nice shape. New belt. Not rotted and paint is still nice. Deck is super solid. I have...

Long story short, I had a 31'deep x 44'wide metal barn put on property I was going to build a house on, and now I am not. I am looking at property about 30 miles up the road and am debating disassembling the barn and taking it with me. It is made by Eagle Carports. Everything is square tube...

I bought a used Mahindra 3016 with the ML115 loader. Didn't notice until weeks later that the parking leg for the loader wasn't there. I can get a new one for $80, but if somebody has one and can give the pipe o.d. and length I will try and fab one. Any help is appreciated. Stan