Thanks all -probably easier than changing the oil in sub-freezing temps.
Any of you actually install the pads in the cold weather? I will have to do 2 of them as well, similar split oil pan.
Anyone know what oil plug thread size is on a 2007 DK40SE HST?
Thinking of getting an oil heater that goes in the oil drain plug hole.
Anyone have any experience with heating the engine this way.
Have a magnet heater on the frame rail next to pan as the pan is non-ferrous and it isn't really...
OK so when I hit the key to start - I get a really loud whine that sounds like it is centered right at the firewall. Unfortunately it happened right when I had to leave town so I haven't had a chance to check it out for more than 3 minutes.
I have never heard of a relay or electrical controller...
OK so right around 300 hours on my DK40 and after a pretty rough winter the beast won't fire. Mines probably in the 2008 vintage (I'd really have to check the book).
I'm reading a lot of fuel related issues....
My symptoms are a little odd though.
It will crank like crazy but won't light off...
So i replaced a hose on the woods bx70 backhoe that was leaking badly only to still have a problem with boom swing drift.
When swinging the boom left or right and releasing the control back to center the boom starts to drift back to center with no input. This is initially how i determined the...
Anyone out there used or recommend bolt on wheel weights for a DK40SE HST?
I will fill the tires if I have to but I prefer something I can lift in sections or plates. I don't have any way to wrestle with 900 lb tires either - need a lift or another tractor! My brother-in-law, myself and a...
Wanted to thank the Wallace crew for being swift and sure with the advice and the quick turn around on parts!
Would recommend to any of you Kioti guys out there.
I don't get here often enough - I used this site to research my FEL control fix and it was pretty good. And I broke down and did...