tagslg's latest activity

Thanks for checking in, sixdogs. My schedule hasn’t let me get after this as much as I was hoping but this past weekend I did get new...

Thanks, Leonz, if I recall, I believe the cup washers were pretty flat last time I switched blades and likely need to be replaced. When...

You may be right, sixdogs; might be worth a phone call at this point. I did exchange emails with Woods a while back and their feedback...

Thank you for all the advice! I will not be messing with the belt with the PTO engaged! With rain in the forecast, I should have some...

Thank you all for looking at this and offering so much input. Sandman/Smokey - attaching the spindle assembly diagram in case it helps...

Thanks for all the replies. The blades on there are Woods 18881 which are listed as medium suction 20 3/4" blades; tip to tip they...

Thanks, Smokey, I'll have to look into the manual to see if I can locate the bolts you're referencing and see if I can figure out if...

Thank you for the replies. Here are some pictures under the mower; I'll get some blade height measurements and deck height measurements...

Good afternoon, I have a Woods RM550 finish mower that has started mowing poorly (see attached pictures). I know the grass is pretty...