Re: Small hose identification needed *Photo Added*
Here is a picture of the part from a parts diagram. However it isn't part of the diagram and I can't seem to find it on any of the others. The part itself is actually fine, its the small hose coming off of the top of it that is the issue.
Small hose identification needed *Photo Added*
I have a 2006 Case DX45 and I noticed tonight that I seemed to be leaking some hydraulic fluid. I cleaned the area around the pump and attempted to find the leak. Luckily, I was able to find it rather quickly. However, I can't figure out what the...
I actually have a Case DX45, but was wondering if any of the TC owners have any insight in to adjusting the throttle lever? It had been super tight before so I loosened the nut on it and found a sweet spot that is loose enough for easily adjusting it, yet snug enough that it will hold RPM. Since...
Does anyone have any tips or tricks on removing the starter on a 2006 DX45 with factory cab? I am needing to add the additional relay to the starting system but haven't figured out the best way to get the starter off or what wrenches I may need. Thanks for the help!
I have a 2007 Case DX45 with factory cab. I went to use the tractor today and the a/c isn't working. Just last weekend it was working as it should. A friend of mine operated the tractor last and apparently forgot to shut down the air and fan before turning off the tractor. I know it said in the...
I was finally able to get my tractor out and put a few hours on it this weekend. Overall everything went quite well. However, I did notice some water leaking from the right side condensate line, just an inch or two from the box. The line is covered in wire loom and I just happened to notice it...
I searched through all of the NH threads and tried finding a fix but unfortunately a lot of people don't post their fixes so here I am. My tractor is new to me and I haven't used it much as I've been going through and fixing some minor issues and doing a full service on it. Last night I decided...
Does anyone have any experience with adding a block heater on the TC45DA/Case DX45? I'd like to add one but I wasn't able to find much from anyone that has done this on theirs. Is there a particular heater that is better than others? I read where some people were complaining about the ears on...
Would anyone with the above tractors that are running R4 tires be able to take a measurement of their tires outside to outside and maybe advise of how the tire set up is? Currently, my tires are the widest they can be as far as I can tell, and it appears I have 3 more options. From the math I...
I just noticed that the light on my A/C switch isn't working. Is this something that can be common for these lighted rocker switches? The switch function still works as it should, it just doesn't illuminate once it's turned on. I actually liked the illumination as it was a good reminder to shut...
What are the 2 rivet nuts for on the right hand side b pillar on a TC45DA/DX45? There's also a little bracket close by as well. I haven't been able to figure out what kind of option it could have been for. The only thing I could come up with is maybe to mount a fire extinguisher?
Full disclosure, I'm new to the tractor owning world, but I have been trying to learn everything I can. My DX45 currently has R4 tires that are spaced 78" outside to outside. It seems a little wide to me, and I would like to get them spaced so that a 72" implement will cover the tracks. It seems...
I've got a 2007 Case DX45 with factory cab and the weatherstrip on the right door is about a foot short. I don't think it was supposed to be that way from the factory, but I can't figure out why it would have been removed. Does anyone know if there is some sort of aftermarket solution that might...
I am having to replace my windshield washer fluid reservoir in my 2007 Case DX45 as it is busted where it slides on to the bracket. I've only been able to locate them from one online retailer and they're quite proud of them, but I really need it in my area. My concern is getting it back on to...