TractorTech's latest activity

Look at the parts book detail on the cylinders. It shows a measurement from the from the supply tube to the end of the cylinder to...

The thing that made/makes it a 231 rather than anything else was that it should have a shorter spindle. From your profile picture, that...

My dad used to completely rebuild one of old N-series every year, which meant a complete rebuild every third of fourth winter. Of...

The rod bearing is the problem, but if you are using the old bearing in the same spot, you may be simply overtorqueing the bearing...

Most tractors of this period have had an overhaul at some point. The D designation in the serial number indicates that the engine was...

What is wrong with the new carburetor and what was wrong with the old carburetor?

Welcome to TBN! The engine would have a serial number on the RH bottom of the block stamped just above the oil pan with a C to indicate...

That is the power steering system. The main hydraulic system fill port and dipstick is on the rear of the tractor.

It appears that you are correct ! I didnt realize it was a dipstick. The parts drawing on the New Holland site shows a screw in plug...

A long bar tobturn the engine over is not real normal, but it does take some effort. You oiled the cylinders and bearings when you put...

It is missing the plug/dipstick. Here it is:

Welcome to TBN! You might reach out to Gandy themselves: https://gandy.net/collections/parts

The shop that is selling the gear clutch, also has for sale a 1210 gear box casing, it looks identical to mine so I am fairly confident...

No not yet because the items from ebay cannot be returned even if they are incorrect, and I do not want to be stuck with a stripped...

Welcome to TBN! Not sure, but may have to bleed the pilot line for the swing valve or the swing line itself, although most cylinder...