TractorTech's latest activity
-
TTractorTech reacted to Harry in Ky's post in the thread Farmtrac 60 steering cyl leak with
Good Post.
Having never seen the cylinder you're working on I have no idea how it's made or how that joint comes apart. I only know the cylinder... -
TTractorTech replied to the thread Farmtrac 60 steering cyl leak.Essentially, that is a 5000 series Ford copy
-
TTractorTech reacted to Harry in Ky's post in the thread Farmtrac 60 steering cyl leak with Good Post.
There has to be a seal on that end. On the Ford tractors that used steering cylinders similar to that the "stepped down area" as you put...
-
TTractorTech replied to the thread Farmtrac 60 steering cyl leak.Interesting. I see two blue u-cup seals on the bench. Where does the second one go? That would be the one for the rod end, but I agree...
-
TTractorTech replied to the thread I need a Iseki e3cd block. or motor.Welcome to TBN, by the way. Hope we have been helpful.
-
TTractorTech replied to the thread Ford Tractor Can’t Figure Out Timing.The only thing that I can add, and I think you already alluded to this, is that the rotor is bad where it mounts to the shaft.
-
TTractorTech replied to the thread Ford Tractor Can’t Figure Out Timing.Pictures will not come up due to permissions. Can you just attach to your post? Also, your description is unclear as I read it the same...
-
TTractorTech replied to the thread Puzzle identifying haybob model for parts.Welcome to TBN! Doing a Google Lens search, it appears to be a Lely Super Zip 380 or 420
-
TTractorTech reacted to MinnesotaEric's post in the thread Does anybody know of any cheaper alternatives for Kioti relays? with Good Post.
The OEM T4180-69941 relays that were manufactured by OMRON are 25.7mm square, so I called Digikey to find an equivalent. Talking with a...
-
TTractorTech reacted to mrmikey's post in the thread Does anybody know of any cheaper alternatives for Kioti relays? with Good Post.
When companies divert from a common, standard, reasonably price product so you have to purchase from them at a stupid overinflated price...
-
TTractorTech replied to the thread New hydraulic piston too large.Welcome to TBN! If you look at the parts book, the oring for the 3000 measures 2.825" (0.215" thickness + 2.61" inside diameter), so it...
-
-
TTractorTech reacted to John0829's post in the thread how much gear oil for a woods RC-5 rotary cutter? with Good Post.
I prefer John Deere corn head grease or "0" grease for gear boxes. It is what I have/use in ALL my gear boxes.
-
TTractorTech replied to the thread Looking for inexpensive AW46 - Hydraulic Oil.Probably dealer gets a better bulk buy from NH on oil. JD does have different recommendations for some of their industrial stuff. JD...
-
TCase-IH actually lists 3 for it: Oil Filter | Case IH | MyCNH US Store Copy and paste the part number to Google search online. One...
-
TTractorTech replied to the thread Flail mower for Ford 1210.Welcome to TBN! The 1210 will run a 48" flail just fine. Many to look at, but here is one that is just a flail mower...
