Recent content by Tunin

Hi guys, I did it, it works like a charm, I was going to do it via a cable, a switch on the grapes trailer but I went back to the original plan, remote control 433Mhz, simpler, cheaper, I live in an area where I am probably the only one in miles that uses anything on this frequency... I will...

Thank you guys, much appreciate the input.i ordered some 3 pin Deutsch pigtails, they should plug right in when I unplug the original switch, it is easily removed… I will hardwire the wire in to the trailers, we have two. Use the original switch by making a easy removing mount. I would not...

I was thinking of the parallel extension cord type of a switch, installed somewhere, I wanted to buy a Kubota switch for this, I almost fainted, 190 euros for the switch. I researched some other, those switches are pricey, cheaper way was the remote way... I was also thinking of making an...

I know it is something that would be a safety issue but everything working the fields is. Accidents happen no matter what, just as long as one is not dumb. Yes, this little Kubota has an Push turn latch button, three wires, switching the voltage from the common to ether one of the pins. I am...

He hee, Luckily I do not live in Canada/USA... to many lawsuits, regulations there.

Hello, I was wondering has anybody wired a remote on/off PTO on a Kubota tractor? During our grape harvest, when unloading grapes from the grapes trailer (auger/pump, pto driven) in to our destemmer, sometimes I am alone running it all, it would be really helpful. When the destemmer is full I...

Some more images

Hello guys, I just thought I would do a bit of an update here after a while of owning the new tractor, it has been over a year… i must say this tractor was a game changer for me. working with the smaller Kubota tractors I had worked for us but this is just so much easier and on another level...

Detoured from the build, had to make a bottle holder, :)

Hi, I had the Makita, two battery version when it just fot out, it was OK for what we used it for, pruning vineyards. It is gone now, replaced by a Husqvarna 40V, this saw is OK but the whole system from Husqvarna is junk. The batteries act up all the time, you never know when it will work and...

Thx mate, I hope I can afford greasing up my tractor, it is becoming as expensive as our politicians and bureaucracy. 😂

Hi guys, i was just wondering if anyone knows what is so special about this grease that it costs so much 100 euros per tube (Ended up buying one tube from the ads for 50 euros). The manual of my tractor, Antonio Carraro requires this grease for some of the zercs. Tech sheet link thank you

I put it all together after welding the aluminum (still learning tig welding), then realized some of the bearings on the pulleys are bad… decided to replace them all 12…getting there 😅

I’ve been busy with the ripper, grubber and the trimmer at teh same time, adopting, fixing cracks, reinforcing the structure… some photos if any interest…

Exploded :) I took it all apart, to weld the broken parts together and replace the nuts/bolts to stainless (rusty) and some ball bearings… after that, I will start building a mast/harness.