Recent content by Vyacheslav Nevolya

The tires are temporary, I will install tractor tires later

Shortening of the semi-axis. I didn't want to weld "butt to butt", I think this method is not reliable and the axis will break near the welding seam. I cut the axle to length, drilled the hole and pressed it in. Then drilled a hole, pressed a roller from the bearings into it as a key, and...

Additional reduction gear and PTO drive shaft. Used gears from a car.

Yes, this is a new project.

This way I got 8 forwards and 4 reverses

I used the gearbox from the car, dismantle 3-4 gears, they are now not necessary

Greetings. At the beginning of the summer I started building a garden tractor. His task was to mow the lawn, the result exceeded all my expectations, so I decided to do 4x4.

Hello. Two years ago I built this two-wheeled tractor. For all the time no changes on the two-wheeled tractor, the design turned out reliable. But on the rotator i modified the reducer, installed a smaller gear to reduce the speed of the knives.