Recent content by Wolverinefarm22

The new “Lamborghini” is a Deutz Agrotron 9340 TTV. Top of the line for SDF

Free way to get around it is to put the gear selector in L and manually go to the highest gear. It disables afm or dfm and drives like normal.

I have a big part of my family in northern Michigan who are loggers and run Husqvarna only. Between the stihl 290 and the husqvarna 460 rancher me and my dad own I prefer the husqvarna

There is always a point where you “could” consider it losing money as in value compared to your expected value, but leaving it on the field is actual lost money. And people like some of us that have cattle will feed it there to at least get some feed value out of hay that may be unfit for the...

Good job getting it off. I worked on one for DAYS on our old brush hog. With heat, pounding, prying, impacts, every darn thing we could think of and it didn’t move an inch. So instead of taking it off to tighten down the bolts holding the gearbox we just welded the gearbox solid and welded the...

Mine was on the same shifter. I did just replace the sensor and everything worked afterwards. No adjustments or anything else. Hope ya get yours figured out

Chris Ledoux- Western Underground Or any other Chris Ledoux George Strait- Blue Clear Sky

All I can say is wow I am glad I didn’t drive an old Yanmar home from the dealership it would have been an 8 hour ordeal

I had one that came with a clutch so I am no help. I would always have a shear pin or clutch for all pto implements though

We baled ideally around 15% and 4x4 were about 650 apiece. Our baler was a massive PITA though so I sold it and got a 4x5 and another small square baler. 4x5s of Timothy and clover mixed ran right at 1000 lbs.

I don’t know about the vinegar and calcium buildup but wouldn’t using a water softener in line before the tank eliminate this issue long term

Appears to be a Massey Harris model 37 2 bottom plow. Sold in 2 or 3 bottom in the mid 50s

I use Ike’s total pest control it’s 7.9% bifenthrin and works like a charm. And a gallon covers over 10 acres

Don’t know if this is the same but I had a 2018 farmall 50a. Was a good hay tractor for the 300 or so hours i owned it. Only issues I really had was a neutral sensor and starter both around 50 hours of me buying. Worked a 3 bottom plow, disc, and tiller at times too but it spent most of its...

I used to cut with a 6 foot with a 21 pto hp tractor and it worked alright, then I went to a 45 pto hp with the same brush hog and it cut so much faster