WranglerX's latest activity

Sounds like a parasitic load ... IF you disconnect a terminal on battery and put a voltmeter on disconnected terminal and battery post...

THE pressure on return line to filter and cooler has no relationship as to height/location as to outlet of control valve or height of...

Looks to me like a standard hydraulic system breather...

Why would it have a vent screen if it was not compatible....

If a piece of crud gets between the metal ball or poppet and seat they will leak. Look into the QD that is leaking to see if there is...

Cleanliness is next to godliness.... Also prevent lots of problems... Clean up fittings ... Check for crud between ball/poppet and...

YEs ditch the valve and put coupling in place and reinstall vent screen.....

Does Mahindra have online parts catalogue for that model?

Open it up a bit and forget about it...... MY splitter has a 1/16 hole drilled in filler plug..... Been the way for 30 years or so...

Go big..... Four 200#(+) and large diameter, small diameter require scrupulously clean floor, to wit a bean caught under shopping cart...

If load is equally distributed on all four caster its probable yes...

I thought I was the only one to shut off the tractor when connecting the PTO. I do it for safety purposes. I could just disengage the...

I was contemplating 3PH splitter until I learned the hydraulic flow rate of my tractor was so low splitter operation would be slow...

Never really liked the idea of a mid point lift.... To easy to screw up ballance and to easy to crush under working of vehicle ... and...

1/8" wall is not enough. Do you plan on using these lifting bars with that lift you pictured? Balancing 77" on top of a 53" support...