The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool

   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #41  
Quite a few likes and responses for spam-vertising. Check this guy has two posts basically the same. Smh
Not spam-vertising, he is an Advertiser like many others on the forum: Advertise on TractorByNet – TractorByNet – Tractor Community & Resource

Screenshot 2023-07-12 18.11.48.png


And his thread: The Original Tractor Relief Tool - Easier Hydraulic Connections
 
Last edited:
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #42  
That's not the OP. Check the original post. It comes across like some random poster, not the advertiser, but is clearly fake. I've got no problem with an advertiser identified as such hawking their products to us.
 
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #43  
I guessed wrong. You didn't specify which post.
 
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #44  
Maybe instead of a push-in style, a quarter turn spiral acceptor might work better so instead of pushing you are turning. Like big truck air lines.
 
Last edited:
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #45  
$125 bucks for that tool set actually isn't that crazy after you consider buying the parts and the drill and tap part.
 
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #46  
$125 bucks for that tool set actually isn't that crazy after you consider buying the parts and the drill and tap part.
You're right. If you have to buy all the parts, and then put in the time to fab, then just buying the tool isn't so bad.

I think I already had everything but the NPT plug, so mine probably cost me all of $4, plus spare parts already in the bin.
 
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #47  
I've posted it before, but this is the clamp I made for this,
 

Attachments

  • Hydraulic coupler tool (1) (Large).jpg
    Hydraulic coupler tool (1) (Large).jpg
    873 KB · Views: 19
  • Hydraulic coupler tool (2) (Large).jpg
    Hydraulic coupler tool (2) (Large).jpg
    718.2 KB · Views: 17
  • Hydraulic coupler tool (3) (Large).jpg
    Hydraulic coupler tool (3) (Large).jpg
    664.6 KB · Views: 18
   / The Hydraulic Fight is Over - Hydraulic Coupling Pressure Relief Tool #48  
5” c-clamp for me. Cheap.
 

Tractor & Equipment Auctions

1994 Thomas Built SAF-T-LINER (LOW MILES, CUMMINS, ALLISON) (A52748)
1994 Thomas Built...
Greenworks Commercial 82V CZ60R Zero-Turn Mower- BRAND NEW, NEVER USED (A52748)
Greenworks...
2015 Nissan Sentra Sedan (A50324)
2015 Nissan Sentra...
2008 FREIGHTLINER B2 BUS CHASSIS (A52576)
2008 FREIGHTLINER...
2004 Mercedes E320 Sedan (A50324)
2004 Mercedes E320...
2005 NEW HOLLAND DC95WT CRAWLER DOZER (A51406)
2005 NEW HOLLAND...
 
Top